Marvell FastLinQ Edge Network Adapter Drivers Version 3.1.6.0 WHQL
Téléchargement

Merci d'avoir effectué ce téléchargement Marvell FastLinQ Edge Network Adapter Drivers Version 3.1.6.0 WHQL

Si votre téléchargement ne démarre pas automatiquement après quelques secondes,merci de cliquer sur le lien de téléchargement situé au-dessus

Vignettes:

Full screenshots disabled
Description:
  • Nom du Pack: Marvell FastLinQ Edge Network Adapter
  • Date & Drivers Version: 12/17/2021,3.1.6.0 (update 11/02/22)
  • WHQL: 20/12/21
  • Pack Version: 3.1.6.0 (23/12/21)
  • Sous:  Windows 8.1/10/11
  • Systemes: 32/64 (X86 & X64)
  • Pour chipsets:  AQC100, AQC107/108, AQC111/112  AQC100S, AQC107S, .. 
  • Inclus: 
  • Pour Cartes:
Marvell FastLinQ Edge 10Gbit Network Adapter'
Marvell FastLinQ Edge 10Gbit Gaming Network Adapter'
Marvell FastLinQ Edge 5Gbit Network Adapter'
Marvell FastLinQ Edge 5Gbit Gaming Network Adapter'
Marvell FastLinQ Edge 2.5Gbit Network Adapter'
Marvell FastLinQ Edge Gigabit Network Adapter'
Marvell FastLinQ Edge Felicity Network Adapter'
Marvell Antigua Engineering Sample'

SANLink3 N1 10Gbit Network Adapter'
SANLink3 10Gbit SFP+ Network Adapter'

ASUS Marvell 10G Ethernet connection'
ASUS Marvell 5G Ethernet connection'
ASUS ROG AREION 10G'
ASUS XG-C100C 10G PCI-E Network Adapter'
ASUS XG-C100F 10G SFP+ Network Adapter'
ASUS Marvell AQC111C 5GbE connection'
ASUS Marvell AQC112C 2.5GbE connection'
ASUS 10G PCI-E Network Adapter'

GIGABYTE 10Gbit Network by AQtion AQC107'
GIGABYTE 5Gbit Network by AQtion AQC111'

CalDigit 10Gbit Network Adapter over TBT (NDIS 6.50 Miniport)'
CalDigit 10Gbit Network Adapter over TBT (NDIS 6.50 Miniport)'
CalDigit 10Gbit Network Adapter (NDIS 6.50 Miniport)'

Sonnet Solo 10G Thunderbolt 3 Edition'
Sonnet Solo 10G Thunderbolt 2 Edition'
Sonnet Solo 10G SFP+ Thunderbolt 3 Edition'
Sonnet Solo 10G SFP+ Thunderbolt 2 Edition'
Sonnet Presto Solo 10GBASE-T Ethernet 1-Port PCIe Card'
Sonnet Presto Solo 10GbE SFP+ Ethernet 1-Port PCIe Card'
Sonnet Echo Pro Thunderbolt 3 Dock'

OWC Thunderbolt 3 to 10GbE Adapter'
OWC 10Gbit Network Adapter'

AKiTiO 10Gbit Network Adapter'

Synology E10G18-T1'

QNAP QXG 10GbE Network Adapter'
QNA-T310G1T'
QNA-T310G1S'
QNAP QXG-10G2T-107 10GbE Network Adapter'
QNAP QM2 Expansion Adapter'
QNAP QXG-5G1T-111C 5GbE Network Adapter'
QNAP QXG-5G2T-111C 5GbE Network Adapter'
QNAP QXG-5G4T-111C 5GbE Network Adapter'

Allied Telesis AT-DNC10 Series Ethernet'

BUFFALO LGY-PCIE-MG2'
  • Release note: 
##v3.1.6.0
_Date 12.20.2021_
* Updated Marvell product name to 'Marvell AQtion Network Adapter'
* Add Win11 folder for driver binaries.

##v3.1.5.0
_Date 07.10.2021_
* Updated RSC OOB data fields in NBL.

##v3.1.4.0
_Date 11.08.2021_
* Added CodeQl changes.
* Increase chip reset timeout to 2s
* Updated ASUS Device Description for model XG-C100C.

##v3.1.3.0
_Date 05.07.2021_
* Merged the changes from dev-release-3.0.x
* Added power management registry entry
* Modify ASUS Device Description for model XG-C100C
* Patch for WOL Issue
* Support for Win11

## v3.1.2.0
_Date 02.06.2021_
* Fixed NDISTest failures introduced with 3.1.0.0
* Logging linkstate at every boot-up
* 1c_OIDSwmi fails due to DASH status indication
* Driver updated to support Antigua DeviceIDs
* SleepOnDisconnect (D3D) Removed
* Add HWID for Lenovo AQC113C
* Add HWID for GigaByte-GC-AQC113C
* Added TODO on minor issues seen after merge
* Dirty wake with S3 and S4
* Added HWID for ASROCK-Z690

## v3.1.1.0
_Date 28.04.2021_
* Fixed NDISTest failures introduced in previous build

## v3.1.0.0
_Date 22.04.2021_
* Added DASH support (integrated from 2.x branch)
* Added Service Mode support (from 2.x branch)
* Merged miscellaneous minor fixes and improvements from v2.x

##v3.0.21.0
_Date 29.06.2021_
* Modify ASUS Device Description for model XG-C100C.

##v3.0.20.0
_Date 09.06.2021_
* Driver updated to support Antigua DeviceIDs
* SleepOnDisconnect (D3D) Removed
* Logging linkstate at every boot-up
* Add HWID for Lenovo AQC113C
* Add HWID for GigaByte-GC-AQC113C
* Dirty wake with S3 and S4
* Added HWID for ASROCK-Z690

## v3.0.19.0
_Date 22.01.2021_
* Removed unsupported RSS IPv6 extension header capability
* Removed unsupported half duplex speeds
* Disable DeviceSleepOnDisconnect by default
* Correct Hardware IDs for AQC113-based Asus NIC
* Enabled WakeFromPowerOff for AQC113

## v3.0.18.0
_Date 18.11.2020_
* Added Hardware IDs for AQC113-based Asus NIC
* Windows 8/8.1: enable PM by default for AQC113 (HCK requirement)
* Fixed RSC offload configuration (HLK test failure)
* Added workaround for OffloadLSO test failure in HLK 19041

## v3.0.17.0
_Date 12.10.2020_
* Security checks for secure AQC113 parts

## v3.0.16.0
_Date 31.08.2020_
* Support for Antigua B0 counters
* Additional HWIDs for Antigua
* Advertise 2.5G/5G NBase-T speeds along with 2.5/5G Base-T
* Add logging of 10Mbps link speed to system log.
* Fix reporting DeviceSleepOnDisconnect capability on Atlantic
* Fix RSC & Hyper-V vSwitch problem


## v3.0.15.0
_Date 09.06.2020_
* Low Power on Media Disconnect
* Init-time instructions (as part of Low Power on Disconnect)
* Conformance to latest filtering spec: don't touch multicast filter
* Enable EEE for AQC113 family
* Fix TX stuck recovery logic
* Fixes & improvements for RSS logic for AQC107/AQC113
* Fixes D0->D3 state transition: drain transmit before disable interrupts

## v3.0.14.0
_Date 05.05.2020_
* Filtering infrastructure
* Dynamic interrupt resources allocation
* Separate trace flag for firmware layer
* Enable EEE at 1G link speed for AQC111C/AQC112C
* Improve RX checksum offload workaround for AQC107
* Fix security checks on AQC107
* Remove auto-generation of MAC address
* Tidy up code

## v3.0.13.0
_Date 27.03.2020_
* Wake Reason Indications
* Provide firmware with the current MAC address
* WMI interface (not compatible with 2.x driver)
* Cable Diagnostics
* Changes for NDISTest compatibility
* Minor misc fixes and improvements

## v3.0.12.0
_Date 06.03.2020_
* Wake on ping behavior with ARP offload
* Update reset sequence
* Cleanup HAL

## v3.0.11.0
_Date 18.02.2020_
* Fixes for NDISTest
* Rework internal link parameters
* Update CI
* Update non-FF register to `0x1c`


Soumis par:
Fdrsoft (admin)
Soumis le:
11 Feb 2022
Taille du fichier:
6.46Mo
Téléchargements:
352
Version du fichier:
3.1.6.0 WHQL
Auteur du fichier:
Fdrsoft
Connectez-vous pour envoyer votre vote