Marvell AQC113C FourPartID Firmware updater edit

Or you have the reason why you try nothing, it will always be better 

I took a dump of the factory firmware today with a programmer to find out the exact firmware in the NICGIGA REV2.0 GiGaPlus Rev 2.0 cards
so i know the exact firmware i should use

Its AQC113-DirtyWake_Bx-1.5.38_bdp_aqsign.clx

AQC113-DirtyWake_Bx-1.5.42_bdp_aqsign.clx is the correct update

Im going to use AQC113-DirtyWake_Bx_ASPM_Enabled-1.5.42_bdp_aqsign.clx
to enable ASPM though

WOL works on it Its AQC113 and not AQC113C
Its PCIE 4.0 x 4 not 3.0 x2

Firmware is 1.5.38 out of the box
Connected to device '0000-0B:00.0'
Chip reset completed (boot from flash). Time: 70 ms
Loaded MAC FW Version: 1.2.122
Loaded PHY FW Version: 6.1.2 (reported by MAC FW)
Loaded bundle: 1.5.38

NICGIGA REV2.0 GiGaPlus Rev 2.0
FourPartIDs:0x1D6A:0x04C0:0x1D6A:0x0001

REV2.0 PCIE 4.0 X4 Firmware 1.5.38 WOL AQC113

edit
update.bat seems to cause no connection
something wrong with making updated.clx? due to xml being wrong for the card?

flashing like so is fine
flashupdate2 --reflash ATL2-8.0.1_AGENT_sign.CLX AQC113-DirtyWake_Bx_ASPM_Enabled-1.5.42_bdp_aqsign.clx
kickstart2
rem ******************** done restoring factory NICGIGA firmware sleep or shutdown the pc ********************