Marvell AQC113C FourPartID Firmware updater edit

i had to desolder the chip on both of my cards
it wont dump properly still on card it introduces random corruption

Hello, I also have the Z690 Aorus Master and yesterday I updated the firmware from 1.3.36 to 1.5.38.

Now the network card is no longer accessible, neither under Windows nor under Debian.

How can I fix this?
I was able to save the hardware ID:
Connected to device “0000-03:00.0”
FourPartIDs:0x1D6A:0x14C0:0x1458:0xE000.

What was strange was that the firmware version wasn't displayed under Windows, but it was displayed under Debian.
Finally I flashed it with Windows.

It ist the Marvel Aqtion ACQ113C 10GbE LAN Chip.

Hi, have you tried reflashing the bios then in the setup is it active?

Yes, Bios Version is F28, and Network card is on active. But no output at Windows DeviceManager or in Debian

Have you done a clear CMOS or reflash the bios in case