Page principale de Remository
Renesas/Nec uPD720201/720202 USB 3.0 Drivers Version 3.0.23.1 WHQL
Téléchargement
Vignettes:
- Soumis le:
- 13 Apr 2016
- Description:
-
Sous: Windows 20xx/Xp/Vista/7/8/8.1 (32/64)
Date du drivers:
Version: 3.0.23.1
Pour chipsets: uPD720201 & uPD720202
Langues:
Release note:
- Windows Logo Information Submission ID: 1519851 Product Name: Renesas Electronics USB3.0 Host Controller Category: Device Subcategory: Bus Controllers and Ports > USB Controller Unclassiified Qualification Level: Signature Only - Microsoft Windows XP family, x86 Signature Only - Microsoft Windows XP family, x64 Logo - Microsoft Windows Vista family, x86 Basic Logo - Microsoft Windows Vista family, x64 Basic Windows 7 Windows 7 x64 Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64
[1. Modified driver] 1-1.Additional remediation was implemented for the following issues: [ver 3.0.20.0's history, item 2-2] 2-2. When continuously starting & stopping the video capture with a specific USB2.0 Camera, the specific USB2.0 camera cannot restart the video capture.
1-2.There is a possibility that BSOD occurs when performing the Common Scenario Stress-with-IO test in WHQL, when connecting an external USB hub to USB 3.0 Host Controller. 1-3.There is a possibility that BSOD occurs when S3/S4->resume is executed with the xHCI Backwards Compatibility Tree on enabling the driver verifier.
1-4.The host driver clears USBLEGCTLSTS register after the host driver obtained Ownership from Ver3.0.2.0Beta. Therefore, BIOS needs to set 'SMI on OS Ownership Enable' bit in USBLEGCTLSTS register to '1b' if BIOS has set 'HC BIOS Owned Semaphore' to '1b' and hands Ownership off after S3/S4->Resume. If a system using SMIB signal doesn't set 'SMI on OS Ownership Enable' to '1b' after S3/S4->Resume, there is a possibility that the host driver cannot obtain Ownership and Device Manage shows the yellow bang for USB 3.0 Host Controller. In order to solve this issue, we modified the host driver to set 'HC BIOS Owned Semaphore' bit to '0b' forcibly if 'HCHalted' bit of USBSTS register is '1b'. 1-5.There is a possibility that BSOD occurs when users connect the xHCI Backwards Compatibility Tree to USB 3.0 Host Controller and operate all the devices in the xHCI Backwards Compatibility Tree and uninstall USB 3.0 Host Controller in Device Manager.
##Note## This issue only occurs on Windows XP. We have never seen this issue on Windows Vista/7/Server2008R2.
1-6.There is a possibility that BSOD occurs when the upper or lower filter driver is installed to USB 3.0 Host Controller driver and the xHCI Backwards Compatibility Tree is connected to USB 3.0 Host Controller.
1-7.There is a possibility that BSOD occurs when the xHCI Backwards Compatibility Tree is connected to USB 3.0 Host Controller and operating all devices and a setting of a ISO device application is changed on enabling the driver verifier. 1-8.A specific USB 3.0 Flash device isn't detected when a specific USB 3.0 Hub, which has the USB 3.0 Flash device connected, is connected to the USB 3.0 Host Controller.
1-9.There is a possibility that BSOD occurs when more than one device with the same VID/PID and serial number is connected at the same time on enabling the driver verifier.
1-10.There is a possibility of BSOD when Hot plug operation is done with the xHCI Backwards Comptibility Tree.
[2. Solved interoperability issue caused by function driver] 2-1.A specific web camera does not work by using the specific function driver. This function driver sets the bad Frame Number when the function driver starts the ISO transfer request.
2-2.There is a possibility that BSOD occurs if a function driver behaves
as causing a conflict between a transfer request and cancelling the transfer for the same endpoint. We have never seen these drivers. [3. Add function] 3-1.Added the registry of SymbolicName when a device is connected. - Soumis le:
- 13 Apr 2016
- Taille du fichier:
- 10 142 928 octets
- Téléchargements:
- 3834
- Version du fichier:
- 3.0.23.1 WHQL
- Auteur du fichier:
- Fdrsoft