Main Repository Page
Drivers
Marvell
LAN
AQC-107, 108, 100, 113, 114, 115, ... & AQN-107, 108, 100, ...
Drivers
Marvell FastLinQ Edge Network Adapter Drivers Version 3.0.19.0
Download
- Submitted On:
- 19 Aug 2021
- Description:
-
- Nom du Pack: Marvell FastLinQ Edge Network Adapter
- Date & Drivers Version: 01/22/2021,3.0.19.0
- Pack Version: 3.0.19.0 (26/03/21)
- Sous: Windows 7, 8, 8.1, 10/11, Server 2012/2016/2019
- Systemes: 32/64 (X86 & X64)
- Pour chipsets: AQC100, AQC107/108, AQC111/112 AQC100S, AQC107S, ..
- Pour Cartes:
Marvell FastLinQ Edge 10Gbit Network Adapter'
Marvell FastLinQ Edge 10Gbit Gaming Network Adapter'
Marvell FastLinQ Edge 5Gbit Network Adapter'
Marvell FastLinQ Edge 5Gbit Gaming Network Adapter'
Marvell FastLinQ Edge 2.5Gbit Network Adapter'
Marvell FastLinQ Edge Gigabit Network Adapter'
Marvell FastLinQ Edge Felicity Network Adapter'
Marvell Antigua Engineering Sample'
SANLink3 N1 10Gbit Network Adapter'
SANLink3 10Gbit SFP+ Network Adapter'
ASUS Marvell 10G Ethernet connection'
ASUS Marvell 5G Ethernet connection'
ASUS ROG AREION 10G'
ASUS XG-C100C 10G PCI-E Network Adapter'
ASUS XG-C100F 10G SFP+ Network Adapter'
ASUS Marvell AQC111C 5GbE connection'
ASUS Marvell AQC112C 2.5GbE connection'
ASUS 10G PCI-E Network Adapter'
GIGABYTE 10Gbit Network by AQtion AQC107'
GIGABYTE 5Gbit Network by AQtion AQC111'
CalDigit 10Gbit Network Adapter over TBT (NDIS 6.50 Miniport)'
CalDigit 10Gbit Network Adapter over TBT (NDIS 6.50 Miniport)'
CalDigit 10Gbit Network Adapter (NDIS 6.50 Miniport)'
Sonnet Solo 10G Thunderbolt 3 Edition'
Sonnet Solo 10G Thunderbolt 2 Edition'
Sonnet Solo 10G SFP+ Thunderbolt 3 Edition'
Sonnet Solo 10G SFP+ Thunderbolt 2 Edition'
Sonnet Presto Solo 10GBASE-T Ethernet 1-Port PCIe Card'
Sonnet Presto Solo 10GbE SFP+ Ethernet 1-Port PCIe Card'
Sonnet Echo Pro Thunderbolt 3 Dock'
OWC Thunderbolt 3 to 10GbE Adapter'
OWC 10Gbit Network Adapter'
AKiTiO 10Gbit Network Adapter'
Synology E10G18-T1'
QNAP QXG 10GbE Network Adapter'
QNA-T310G1T'
QNA-T310G1S'
QNAP QXG-10G2T-107 10GbE Network Adapter'
QNAP QM2 Expansion Adapter'
QNAP QXG-5G1T-111C 5GbE Network Adapter'
QNAP QXG-5G2T-111C 5GbE Network Adapter'
QNAP QXG-5G4T-111C 5GbE Network Adapter'
Allied Telesis AT-DNC10 Series Ethernet'
BUFFALO LGY-PCIE-MG2'- Release note:
# Marvell FastLinQ Edge Network Adapter Windows Driver Nov 11, 2020 ## v3.0.18.0 _Date 18.11.2020_ * Added Hardware IDs for AQC113-based Asus NIC * Windows 8/8.1: enable PM by default for AQC113 (HCK requirement) * Fixed RSC offload configuration (HLK test failure) * Added workaround for OffloadLSO test failure in HLK 19041 ## v3.0.17.0 _Date 12.10.2020_ * Security checks for secure AQC113 parts ## v3.0.16.0 _Date 31.08.2020_ * Support for AQC113 B0 counters * Additional HWIDs for AQC113 * Advertise 2.5G/5G NBase-T speeds along with 2.5/5G Base-T * Add logging of 10Mbps link speed to system log. * Fix reporting DeviceSleepOnDisconnect capability on AQC100 * Fix RSC & Hyper-V vSwitch problem ## v3.0.15.0 _Date 09.06.2020_ * Low Power on Media Disconnect * Init-time instructions (as part of Low Power on Disconnect) * Conformance to latest filtering spec: don't touch multicast filter * Enable EEE for AQC113 * Fix TX stuck recovery logic * Fixes & improvements for RSS logic for AQC107/AQC113 * Fixes D0->D3 state transition: drain transmit before disable interrupts ## v3.0.14.0 _Date 05.05.2020_ * Filtering infrastructure * Dynamic interrupt resources allocation * Separate trace flag for firmware layer * Enable EEE at 1G link speed for AQC111/Bermuda * Improve RX checksum offload workaround for AQC107 * Fix security checks on AQC107 * Remove auto-generation of MAC address * Tidy up code ## v3.0.13.0 _Date 27.03.2020_ * Wake Reason Indications * Provide firmware with the current MAC address * WMI interface (not compatible with 2.x driver) * Cable Diagnostics * Changes for NDISTest compatibility * Minor misc fixes and improvements ## v3.0.12.0 _Date 06.03.2020_ * Wake on ping behavior with ARP offload * Update reset sequence * Cleanup HAL ## v3.0.11.0 _Date 18.02.2020_ * Fixes for NDISTest * Rework internal link parameters * Update CI * Update non-FF register to `0x1c` ## v3.0.10.0 _Date 05.02.2020_ * Set max frame length according to “Jumbo Packet” driver setting * Add thermal shutdown support * Add downshift support * Link interrupt support * Rework internal adapter state transitions ## v3.0.9.0 _Date 17.01.2020_ * Fix setting of packet filters for all multicast * Fix setting of PFC * Use standardized INF keywords for speed & duplex * Introduce support for 10Mbps link speed * Introduce support for half duplex ## v3.0.8.0: Alpha driver v3.0.8.0 for AQC113/AQC100 _Date 09.01.2020_ * Basic backward compatibility with AQC100 * Fixes for RSS multi-group * Reworked interrupts logic * Other minor fixes for AQC113 ## v2.1.21.0 _Date 07.02.2020_ * Fix incorrect checksum reported to OS for packets with non-zero padding ## v2.1.20.0 _Date 10.01.2020_ * Don't use EEE for 1Gbit/s link speed * Enable EEE for specific HWID * Add HWIDs for HP Flatiron
- Forum: Station-Drivers
- Submitted On:
- 20 Aug 2021
- File Size:
- 3.77Mo
- Downloads:
- 1575
- File Version:
- 3.0.19.0
- File Author:
- Fdrsoft
Log in to cast your vote