--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
question about VID and PID in MPTool (Asmedia ASM235CM)
- MrAnon
- Autor Subiect
- Deconectat
- Newbie
-
Enregistré
- Postări: 2
- Thanks: 0
question about VID and PID in MPTool (Asmedia ASM235CM)
acum 4 luni 2 săptămâni - acum 4 luni 2 săptămâniI have just bought a "UGREEN USB 3.1 2.5" Hard Drive Enclosure 6G with 2-in-1 USB A+USB-C to USB-C Cable" (sku 60735)
In my Ubuntu linux SO, I have this info
VID: 174c
PID: 235c
These IDs are correct for ASM235CM chipset¿? because this enclosure supposedly has an ASM235CM chipset.
When I download this tool from ugreen website for disable sleep mode (171120_D1_1E_80.bin) , I find that in the screenshots of manual also ini firmware config file (as_mp_Tool v0.3.ini) the VID is 174c BUT PID is 55AA (¿ASM1051E/ASM1053E/ASM1153/ASM115E?), is this wrong¿? should I change it to 235c before use MPTool??
THANKS!!!
Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.
- aphanic
- Deconectat
- Poster 2
-
Enregistré
- Postări: 9
- Thanks: 5
Re: question about VID and PID in MPTool (Asmedia ASM235CM)
acum 4 luni 2 săptămâniThat said, I also have an UGREEN enclosure that uses the same bridge (metallic top with soft plastic bottom) that shipped as 174C:55AA, with the 171120_D1_1E_80 firmware. I have since upgraded its firmware to 220906_D1_45_01 (it seems, just checked 😅) and I kept the 55AA PID, no odd behavior or incompatibility to report, works as expected. I remember it making me wonder as well, because I had an ASM1153E based adapter that also used that PID.
If you haven't modified the firmware it shipped with, could you make a dump of it first and upload it somewhere? I am curious to know what they use these days. If you have a Windows machine or VM available, ASM FW Reader can do ti ( www.usbdev.ru/files/asmedia/asmfwreader/ ) there is also ASMTool ( github.com/smx-smx/ASMTool ) that could be built for Linux, but I have yet to use it.
Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.
- Shonk
- Deconectat
- Super Utilisateur
-
Enregistré
- Postări: 146
- Thanks: 54
Re: question about VID and PID in MPTool (Asmedia ASM235CM)
acum 4 luni 2 săptămâni - acum 4 luni 1 săptămânăI ordered 5 of them about a month ago direct from Ugreen
all 5 had the same firmware the only difference was the serial number and the nvram checksum byte
220906_D1_45_01.bin the almost off non working led bugs me
220906_D1_15_C5.bin forces it to Transcend Jetflash and the led is reversed (C4 also..)
210830_D1_00_00.bin aparently has a bug that the eject hardware increases the number of unsafe shutdowns;
200416_D1_06_20.bin seems fine and led works the same as 171120_D1_1E_80 but doesnt clone over the drive model
Will be sticking with 171120_D1_1E_80 until something better comes along
with the serial number cloned over and idle timer set to 10 mins instead of 3
Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.
- MrAnon
- Autor Subiect
- Deconectat
- Newbie
-
Enregistré
- Postări: 2
- Thanks: 0
Re: question about VID and PID in MPTool (Asmedia ASM235CM)
acum 4 luni 1 săptămână - acum 4 luni 1 săptămână@aphanic
I just dumped the original firmware of my enclosure with ASM FW reader tool in a Windows 7 VirtualBox machine. You can download it thru this link: www.mediafire.com/file/j7g202wc4b8s6v4/U...ck-firmware.zip/file , I hope it is useful to you.
Regarding VID and PID, I think I get your point, I´ve been searching info and I found this this: usb-ids.gowdy.us/read/UD/174c
It seems 235c PID has been reported but there is no entry for it in the usb.ids file, right? So, I understand that the proper PID is 235c but at this time could be a good option change it to 55AA in case of suffer performance or stability problems in order to SO applies same specific settings for others ASMedia chipsets like ASM1051E ?
@Shonk
I appreciate that additional info about those firmwares.
thanks both of you for responding me!
Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.
- teomialo
- Vizitator
-
Public
Re: question about VID and PID in MPTool (Asmedia ASM235CM)
acum 1 lună 4 zile - acum 1 lună 4 zileI have a 2.5" hard drive (WD Black 7200 RPM) in a Ugreen external case (see photo below) and when I plug it into the USB 3.0 port on the front of my tower, it is recognized for the first time in USB 2.0 (file writing at 40 Mo/s)
If I unplug it, and plug it back in again it is detected in USB 3.0 (transfer of 115 Mo/s)
Do you know where the problem comes ? I would like it to be detected in USB 3.0 when first connected.
I've just found the latest firmware for the ASM-235CM chip. This update is supposed to solve the problem of slow disk recognition in Win11 (so it would apply to my problem) I think it's the right file ?
220906_D1_45_01.bin
www.station-drivers.com/index.php/en/com...own/6036/lang,en-gb/
On the other hand, for the update, I've never done it, it talks about an MP Tools utility, can you guide me for the update or is there a simple tutorial ?
Finally, the HHD 2.5” currently contains some important files. Is there any risk in updating the firmware ?
Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.