Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
- Shonk
-
- Не в сети
- The Best Poster
-

Enregistré
- Сообщений: 141
- Thanks: 62
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
9 ч. 54 мин. назад
use iperf z390 can only get 6.7gbps of actual throughput on pcie 3.0 x1 after overheads maybe you will get more on a pch that has more bandwidth
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
Пожалуйста Войти или Регистрация, чтобы присоединиться к беседе.
- BrN
-
- Не в сети
- Poster 2
-

Enregistré
- Сообщений: 8
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
6 ч. 38 мин. назад
Je ne comprends pas ce qu'il faut modifier. Mon périphérique correspond bien à cette configuration # 3. VID=0x1D6A, DID=0x04C0, SVID=0x1D6A, SDID=0x0001
Mais il me dit device not match. Une idée ?
Mais il me dit device not match. Une idée ?
Пожалуйста Войти или Регистрация, чтобы присоединиться к беседе.
- admin
-
Автор темы
- Не в сети
- Admin
-

Administrateur
- Fdrsoft (Admin)
- Сообщений: 575
- Thanks: 354
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
3 ч. 42 мин. назад - 3 ч. 37 мин. назад
Il faut modifier les deux lignes du fichier flashUpdateScript.ps1
Voici le fichier modifier si besoin
Voici le fichier modifier si besoin
Это вложение скрыто для гостей.
Пожалуйста, зарегистрируйтесь или войдите, чтобы увидеть его.
Пожалуйста, зарегистрируйтесь или войдите, чтобы увидеть его.
Asus Z890 ProArt, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Steelserie Pro , Souris Razer, Boitier HUMMER, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Последнее редактирование: 3 ч. 37 мин. назад пользователем admin.
Пожалуйста Войти или Регистрация, чтобы присоединиться к беседе.
- BrN
-
- Не в сети
- Poster 2
-

Enregistré
- Сообщений: 8
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
3 ч. 20 мин. назад
Merci pour ton retour et le temps passé.
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
Пожалуйста Войти или Регистрация, чтобы присоединиться к беседе.
- jumpy76
-
- Не в сети
- poster 4
-

Enregistré
- Сообщений: 15
- Thanks: 0
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
2 ч. 23 мин. назад
Please try this file after renaming it to .ps1 (not.jpg).
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Пожалуйста Войти или Регистрация, чтобы присоединиться к беседе.
Время создания страницы: 0.082 секунд

