--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
- helzayat
-
- Offline
- Newbie
-
Enregistré
- Príspevky: 1
- Thanks: 0
Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
pred 1 mesiacom 3 týždnami
Gigabyte Z590 Vision D with dual I225-V
My problem is that one of both controllers intermittently drop out with "Windows has stopped this device because it has reported problems. (Code 43)". Disabling the device and reenabling it brings it back for a while.
Rolled back driver to 2.1.1.7 (the latest on the Gigabyte site for this board) but still have the same problem. Thought a firmware update might help.
Followed procedure given till:
EEPROM Image Version: 1.57
Any suggestions?
My problem is that one of both controllers intermittently drop out with "Windows has stopped this device because it has reported problems. (Code 43)". Disabling the device and reenabling it brings it back for a while.
Rolled back driver to 2.1.1.7 (the latest on the Gigabyte site for this board) but still have the same problem. Thought a firmware update might help.
Followed procedure given till:
C:\I225V>EEUPDATEW64e.exe /nic=1 /d NVM\FXVL_15F3_V_1MB_1.89.bin
Using: Intel (R) PRO Network Connections SDK v2.38.10
EEUPDATE v5.38.10.00
Copyright (C) 1995 - 2022 Intel Corporation
Intel (R) Confidential and not for general distribution.
NIC Bus Dev Fun Vendor-Device Branding string
=== === === === ============= =================================================
1 4 00 00 8086-15F3 Intel(R) Ethernet Controller (3) I225-V
2 5 00 00 8086-15F3 Intel(R) Ethernet Controller (3) I225-V
Writing SHARED FLASH. PLEASE DO NOT INTERRUPT THIS PROCESS.
1: Shared Flash image update FAILED! Timeout Error
EEPROM Image Version: 1.57
Any suggestions?
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- admin
-
Autor témy
- Neprítomný
- Admin
-
Administrateur
- Príspevky: 829
- Thanks: 412
Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
pred 1 mesiacom 3 týždnami
Try the latest drivers and if that doesn't work try under Windows PE
Station-Drivers - Comment creer une clé bootable Windows
Station-Drivers - Comment creer une clé bootable Windows
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- John167989
-
- Offline
- Newbie
-
Enregistré
- Príspevky: 2
- Thanks: 0
Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
pred 6 dňami 23 hodinami
Before update my pcie i225v firmware, i made a back files using this command: EEUPDATEW64e.exe /nic=1 /DUMP and i got 2 files: .bin (2MB) and .eep.
the update failed, now i can not use it at all:
EEUPDATEW64e.exe /nic=1 /eepromver:
the update failed, now i can not use it at all:
EEUPDATEW64e.exe /nic=1 /eepromver:
when i try to restore the old bin i get an error: EEUPDATEW64e.exe /nic=1 /FORCE /DATA dump.binUsing: Intel (R) PRO Network Connections SDK v2.38.10
EEUPDATE v5.38.10.00
Copyright (C) 1995 - 2022 Intel Corporation
Intel (R) Confidential and not for general distribution.
NIC Bus Dev Fun Vendor-Device Branding string
=== === === === ============= =================================================
1 4 00 00 8086-15FD Client Foxville with Empty Flash
1: EEPROM Image Version: 2.DA
any solution ? im stuck.Using: Intel (R) PRO Network Connections SDK v2.38.10
EEUPDATE v5.38.10.00
Copyright (C) 1995 - 2022 Intel Corporation
Intel (R) Confidential and not for general distribution.
NIC Bus Dev Fun Vendor-Device Branding string
=== === === === ============= =================================================
1 4 00 00 8086-15FD Client Foxville with Empty Flash
1: Image size larger than flash size, aborting!
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- QuadDamage
-
- Offline
- poster 3
-
Enregistré
- Príspevky: 10
- Thanks: 3
Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
pred 6 dňami 22 hodinami - pred 6 dňami 22 hodinami
If your card changed PID to 15FD, it means that i225's memory chip is empty. Any dump of eeprom or bin will contain useless random data. You said that you have old backup. Eeupdate tool has a bug that generates double-backup for 1M cards. Run any hex editor and delete second half of the backup. Leave area from 0x0 to 0xfffff (1MB).
Flash that file by simply command:
eeupdate /nic=1 /d backup_1mb.bin
Then turn AC OFF for 30 seconds. Wait till all LEDs will turn off on the motherboard.
The eeupdate bug generates 2MB backup for 1M cards like shown:
If your backup is corrupted, write to me. I can do anything with those cards with my magic
i225v@outlook.com
Flash that file by simply command:
eeupdate /nic=1 /d backup_1mb.bin
Then turn AC OFF for 30 seconds. Wait till all LEDs will turn off on the motherboard.
The eeupdate bug generates 2MB backup for 1M cards like shown:
If your backup is corrupted, write to me. I can do anything with those cards with my magic
i225v@outlook.com
Posledný krát upravené:pred 6 dňami 22 hodinami QuadDamage
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- John167989
-
- Offline
- Newbie
-
Enregistré
- Príspevky: 2
- Thanks: 0
Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89
pred 6 dňami 21 hodinamii sent you an email, thanks a lot.If your card changed PID to 15FD, it means that i225's memory chip is empty. Any dump of eeprom or bin will contain useless random data. You said that you have old backup. Eeupdate tool has a bug that generates double-backup for 1M cards. Run any hex editor and delete second half of the backup. Leave area from 0x0 to 0xfffff (1MB).
Flash that file by simply command:
eeupdate /nic=1 /d backup_1mb.bin
Then turn AC OFF for 30 seconds. Wait till all LEDs will turn off on the motherboard.
The eeupdate bug generates 2MB backup for 1M cards like shown:
If your backup is corrupted, write to me. I can do anything with those cards with my magic
i225v@outlook.com
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
Čas vytvorenia stránky: 0.083 sekúnd