--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- admin
-
Konu yazarı
- Çevrim dışı
- Admin
-
Administrateur
- İletiler: 781
- Thanks: 383
- wade7575
-
- Çevrim dışı
- Best Poster
-
Enregistré
- İletiler: 45
- Thanks: 7
- admin
-
Konu yazarı
- Çevrim dışı
- Admin
-
Administrateur
- İletiler: 781
- Thanks: 383
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 3 ay önce
Hi you can suggest it here by adding it as a file otherwise send it to me at fdrsoft@station-drivers.com
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- wade7575
-
- Çevrim dışı
- Best Poster
-
Enregistré
- İletiler: 45
- Thanks: 7
- ole258
-
- Çevrim dışı
- poster 4
-
Enregistré
- İletiler: 15
- Thanks: 6
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 3 ay önce - 1 yıl 3 ay önce
I have bought a cheap ORICO PWM2-G2 enclosure, because I don't need it very often and transfer rate is pretty much the same to some other ones, that be much more expensive. Because it also has an RTL9210B-Chip and at the end of the day this is the core of each enclosure.
For some of them, who missed to dump the original data before updating, here it is:
The serial is all the same at this enclosure. To set the serial to "012345679039" you have to write "012345679038" into your config file.
I have flashed the firmware version 1.32.49.140423
cfg-File looks like this:
This is the result (BTW, I don't use the cable which was included but a TB3-cable from Lenovo and connected to a TB4 port of my laptop.):
- Material - Aluminum Alloy + ABS
- Color - Black/Blue/Pink/Silver
- Dimension - 124(L)*35mm(W)*14mm(H)
- Input Interface - M-Key/B&M-Key
- Output Interface - Type-C (USB3.2 Gen2)
- Transmission Rate - 10Gbps
- Installation - Tool-free
- Support Capacity - 4TB Max
For some of them, who missed to dump the original data before updating, here it is:
Uyarı: Spoiler!
The serial is all the same at this enclosure. To set the serial to "012345679039" you have to write "012345679038" into your config file.
I have flashed the firmware version 1.32.49.140423
cfg-File looks like this:
Uyarı: Spoiler!
This is the result (BTW, I don't use the cable which was included but a TB3-cable from Lenovo and connected to a TB4 port of my laptop.):
Son düzenleme: 1 yıl 3 ay önce Düzenleyen:ole258
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.