NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

I'm trying to update the firmware of my enclosure that use's an RTL9220 controller and I'm using firmware v1.32.78 and when I try use a .cfg file I made myself it won't work and also the firmware updating tool by Realtek delete's the information that's on the file after it try's and fails to update my enclosure.

I copied the configure file from the enclosure before I updated it and save what was on it,I have ever updated my enclosure before so the information is untouched.
I also used the included .cfg called RTL9220_LED0.cfg and my enclosure pass's with that file which also has way different setting's.

This is my enclosure.
www.aliexpress.com/item/1005006754982743...in.53.41961802dtKWaa

This is my enclosure's untouched configuration file can someone look at it and tell what the problem is.

**************************************************************
Device : [Port8] : Realtek RTL9220 #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9220
MANUFACTURE : "Realtek"
PRODUCT : "RTL9220"
SERIAL : "012345678910"
SCSI_PRODUCT : "RTL9220         "
SCSI_VENDOR : "Realtek "
USB_SELF_PWR : n/a
DISK_HOTPLUG : n/a
LED : 0x01
PINMUX1 : n/a
PINMUX2 : n/a
U2_MAXPWR : n/a
U3_MAXPWR : n/a
ASPMDIS : n/a
PCIE_REFCLK : n/a
DISK_IPS_THRES : 0x01
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : n/a
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x64
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : n/a
UART_BAUD_RATE : 0x0000e100
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : 0x0b
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : 0x07
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : 0x01
RAID_CFG : n/a

Boot Mode : Flash
FW Ver : 1.32.82
FW Build Date : 2023.08.11
IC Pkg Type : PCIE/SATA SD
UUID : n/a

Disconn_ForceUSB2 : false





 

Follow the instructions in my post to restore the original configuration
station-drivers.com/index.php/en/forum/e...-1-xx?start=265#2012

Version 1.33.44.011824 problems.
Smart does not work.
Trim does not work.
(Works very well with 1.32.49)
RTL9210B, ORICO M2PJM-C3, RPI-4
 

The firmware only works on the RTL9220VA chipset, I don't know if yours is the RTL9220A or others.

Ok