News

Downloads: 109
Downloads: 312
Downloads: 48
Downloads: 179
Downloads: 380

Top Download

Downloads: 42559
Downloads: 16994
Downloads: 14979
Downloads: 14260
Downloads: 14212
--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

ssd question about VID and PID in MPTool (Asmedia ASM235CM)

  • teomialo
  • teomialo's Ảnh đại diện
  • Tắt
  • Poster
  • Poster
    Enregistré
  • Tổng số bài viết: 14
  • Thanks: 0

Re: question about VID and PID in MPTool (Asmedia ASM235CM)

5 ngày 3 tiếng trước - 5 ngày 3 tiếng trước
#3929
Thanks for your reply. But why is the name strange with the letter “e” at the end when the disk is ejected ?
It should be named after the product string “Ugreen Storage Device”

I'm now hesitating to flash with 200416_D1_48_02 my other three Ugreen enclosures which are my backups.
I'd like to know if this firmware is really stable without any problems.

Do we know the person who creates this new firmware ?
Last edit: 5 ngày 3 tiếng trước by teomialo.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • admin
  • admin's Ảnh đại diện
  • Đi xa
  • Admin
  • Admin
    Administrateur
  • Tổng số bài viết: 757
  • Thanks: 379

Re: question about VID and PID in MPTool (Asmedia ASM235CM)

5 ngày 3 tiếng trước
#3930
The firmwares are provided by manufacturers like Ugreen and of course created by the chipset manufacturer, so Asmedia for the manufacturer. 
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
The following user(s) said Thank You: teomialo

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • teomialo
  • teomialo's Ảnh đại diện
  • Tắt
  • Poster
  • Poster
    Enregistré
  • Tổng số bài viết: 14
  • Thanks: 0

Re: question about VID and PID in MPTool (Asmedia ASM235CM)

5 ngày 3 tiếng trước
#3932
Thank you for this information.
So there is no risk in keeping this new firmware over time ?

Do you have any ideas for the name of the ejector ?

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • admin
  • admin's Ảnh đại diện
  • Đi xa
  • Admin
  • Admin
    Administrateur
  • Tổng số bài viết: 757
  • Thanks: 379

Re: question about VID and PID in MPTool (Asmedia ASM235CM)

5 ngày 3 tiếng trước
#3933
No, there is no risk, the name E is probably due to the configuration file to be checked unless the E indicates the name of the drive E:\
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
The following user(s) said Thank You: teomialo

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • teomialo
  • teomialo's Ảnh đại diện
  • Tắt
  • Poster
  • Poster
    Enregistré
  • Tổng số bài viết: 14
  • Thanks: 0

Re: question about VID and PID in MPTool (Asmedia ASM235CM)

5 ngày 3 tiếng trước - 5 ngày 2 tiếng trước
#3934
here is the configuration file :
I don't seem to see the “e”
The product_string=Ugreen Storage Device is present, but is not taken into account during flash.
Perhaps the config file should be reset to default or is there no point ?
version=1005
[usb_func]
format_enable=0
format_drive_type=1
drive_label_name=Test
wr_test_enable=0
wr_test_binary_name=rwtest.bin
wr_test_count=1
auto_mp=0
preload_enable=0
preload_folder_path=D:\temp
Check_USBStatus_enable=0
Check_USBStatus=1
Check_SerialNumber=0
Auto_Safe_Remove=0
Scan_BarCode=0
uiRemove_after_finish=0
Speed_test_enable=0
Scan_HDDSN=0

[Speed_Test]
read_speed=
write_speed=
speed_test_file_size=

[usb_fw]
fw_enable=1
fw_binary_name=C:\Users\Desktop\asmedia_ASM2235\asmedia_ASM2235\Software\200416_D1_48_02.bin
fw_reload=1
rescan_after_relink=0
ext_fw_enable=0
pd_fw_enable=1
mcu_fw_enable=0
pd_binary_name=D:\FAE\2105\MP_Tool\ASM105xMPTool\Debug\Cypress\Porsche Refresh 3.5 Cypress\Seagate_HDD_DRP_sh11.cyacd
mcu_binary_name=D:\FAE\2105\MP_Tool\ASM105xMPTool\Debug\STM\Liger_EE1EE2prealpha-0.4-force_rev_1.hex

[usb_config]
config_format=1
vendor_id=174C
product_id=55AA
device_revision=0100
manufacturer_string=Ugreen
product_string=Ugreen Storage Device
serial_number=123456789049
serial_number_increase=1
serial_number_increase_HEX=1
serial_number_increase_DEC=0
standby_timer=0
hdd_standby=0
customized_string=1
eup_enable=0
two_leds=0
U1U2=0
low_power_mode=0
2TB=0
image0=1
image1=0
crc32=0
slow_enumeration=0
Win8WTG=0
HDDPC=0
QD32=0
SN_Numbers=12

[usb_mode]
cd_rom_mode=1
Otherwise, I saw an “e” here in the logs.

[img
Last edit: 5 ngày 2 tiếng trước by teomialo.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

Thời gian tải trang: 0.079 giây
Powered by Kunena Forum