--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
Intel® Ethernet Adapter Complete Driver Pack
- Tom
- Topic Author
- 离开
- Super Utilisateur
-
Enregistré
- 帖子: 538
- Thanks: 477
Re: Intel® Ethernet Adapter Complete Driver Pack
6 个月 3 周 � - 6 个月 2 周 �
Intel released Intel® Ethernet Adapter Complete Driver Pack v29.1 WHQL on May 7, 2024
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/822488/Release_29.1.zip (Size: 786 MB)
Release Notes: downloadmirror.intel.com/822488/Release_Notes.pdf
Changelog for v29.1:
New Hardware Support
• None for this release. Although Intel® 800 Series Ethernet Driver (AArch64) v4.2.34 option is presented in the BootUtil tool, ARM Servers are not supported in this release.
New Software Support
• Azure Stack HCI 23H2 OS support.
• RX Timestamp support on E810.
• Traffic Mirroring via tc-mirred on E810.
• Control FW debug logs level via debugfs on E810.
• Flexible VF loopback pacing configuration on E810.
• SyncE4L NIC chaining improvements on E810.
• PHY Statistics Dumps on E810.
• Devlink health support for Tx hang debugging on E810.
• HII VLAN function configuration support for E810 OEMGen devices.
• DMA_buf w/o ODP support for Linux RDMA.
• FreeBSD E810 - Count packets larger than RX MAX as Rx Oversize packets.
• Print NIC FW version on E810.
• FreeBSD X710 - Count packets larger than RX MAX as Rx Oversize packets.
• Log FW Failure Critical Data in Recovery Mode.
• NVMUpdate option to use FW Version to determine if update is upgrade or downgrade.
• Driver can provide debug log when TX unit hang occurs on E810.
• Set E810 debug level and UART option when driver is working.
• Enable E810 GPUDirect community solution: DMA_BUF without ODP.
New Firmware Support
Cheers
Tom
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/822488/Release_29.1.zip (Size: 786 MB)
Release Notes: downloadmirror.intel.com/822488/Release_Notes.pdf
Changelog for v29.1:
New Hardware Support
• None for this release. Although Intel® 800 Series Ethernet Driver (AArch64) v4.2.34 option is presented in the BootUtil tool, ARM Servers are not supported in this release.
New Software Support
• Azure Stack HCI 23H2 OS support.
• RX Timestamp support on E810.
• Traffic Mirroring via tc-mirred on E810.
• Control FW debug logs level via debugfs on E810.
• Flexible VF loopback pacing configuration on E810.
• SyncE4L NIC chaining improvements on E810.
• PHY Statistics Dumps on E810.
• Devlink health support for Tx hang debugging on E810.
• HII VLAN function configuration support for E810 OEMGen devices.
• DMA_buf w/o ODP support for Linux RDMA.
• FreeBSD E810 - Count packets larger than RX MAX as Rx Oversize packets.
• Print NIC FW version on E810.
• FreeBSD X710 - Count packets larger than RX MAX as Rx Oversize packets.
• Log FW Failure Critical Data in Recovery Mode.
• NVMUpdate option to use FW Version to determine if update is upgrade or downgrade.
• Driver can provide debug log when TX unit hang occurs on E810.
• Set E810 debug level and UART option when driver is working.
• Enable E810 GPUDirect community solution: DMA_BUF without ODP.
New Firmware Support
• Enable E700 X722 Tx signal to “always on”.
• Enable E700 to store events details on the NVM in Recovery Mode.When entering the Recovery Mode, X710 will
store the details of the event in the NVM.
• Added native support for BIDI 100G PAM4 Compliance Code Modules (CAUI4 with No FEC).
• Added native support for 10GBaseT 80m module (SFP).
• Added to E810-CQDA2T adapters, 6 ports Mixed Mode 10G/25G.
• Added RDE properties for PortMetrics.Transceivers.
• Disable Optical Module Laser when Link/Port is disabled on E820.
• Allow I2C 2 byte write access for PHY control on E820.
• Enable E700 to store events details on the NVM in Recovery Mode.When entering the Recovery Mode, X710 will
store the details of the event in the NVM.
• Added native support for BIDI 100G PAM4 Compliance Code Modules (CAUI4 with No FEC).
• Added native support for 10GBaseT 80m module (SFP).
• Added to E810-CQDA2T adapters, 6 ports Mixed Mode 10G/25G.
• Added RDE properties for PortMetrics.Transceivers.
• Disable Optical Module Laser when Link/Port is disabled on E820.
• Allow I2C 2 byte write access for PHY control on E820.
Cheers
Tom
Last edit: 6 个月 2 周 å‰� by Tom. 理由: Changelog added
以下用户感谢了你: admin, mdm, grimson, duttyend
- admin
- 离线
- Admin
-
Administrateur
- 帖子: 758
- Thanks: 380
Re: Intel® Ethernet Adapter Complete Driver Pack
6 个月 3 周 � - 6 个月 3 周 �Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Last edit: 6 个月 3 周 � by admin.
以下用户感谢了你: duttyend
- grimson
- 离线
- Poster
-
Enregistré
- 帖子: 15
- Thanks: 5
- Tom
- Topic Author
- 离开
- Super Utilisateur
-
Enregistré
- 帖子: 538
- Thanks: 477
Re: Intel® Ethernet Adapter Complete Driver Pack
6 个月 6 天 �
Intel released Intel® Ethernet Adapter Complete Driver Pack v29.1.1.1 WHQL on May 23, 2024
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/823672/Release_29.1.1.1.zip (Size: 785.9 MB)
Release Notes: downloadmirror.intel.com/823672/Release_Notes.pdf
Changelog for v29.1.1.1:
New Hardware Support
• None available for now.
New Software Support
• None available for now.
New Firmware Support
Tom
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/823672/Release_29.1.1.1.zip (Size: 785.9 MB)
Release Notes: downloadmirror.intel.com/823672/Release_Notes.pdf
Changelog for v29.1.1.1:
New Hardware Support
• None available for now.
New Software Support
• None available for now.
New Firmware Support
• None available for now.
CheersTom
以下用户感谢了你: Ataemonus
- Tom
- Topic Author
- 离开
- Super Utilisateur
-
Enregistré
- 帖子: 538
- Thanks: 477
Re: Intel® Ethernet Adapter Complete Driver Pack
3 个月 5 天 �
Intel released Intel® Ethernet Adapter Complete Driver Pack v29.3 WHQL on August 23, 2024
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/831137/Release_29.3.zip (Size: 818.6 MB)
Release Notes: www.intel.com/content/www/us/en/content-...s-release-notes.html
Changelog for v29.3:
New Hardware Support
• None available for now.
New Software Support
• New OS support: FreeBSD 14.1
• OpenEuler ARM architecture compatibility
• Introduced ICE driver migration for Linux DPLL interface usage in kernel 6.7
• Devlink support for tools algorithm improvement
• Ethtool flow-type ether support
• 40G ESXi new default VMDq loopback behavior and module parameter
• Message logs related to Health Status 0x110 updated
New Firmware Support
Tom
Download Page: www.intel.com/content/www/us/en/download...ete-driver-pack.html
Direct Download: downloadmirror.intel.com/831137/Release_29.3.zip (Size: 818.6 MB)
Release Notes: www.intel.com/content/www/us/en/content-...s-release-notes.html
Changelog for v29.3:
New Hardware Support
• None available for now.
New Software Support
• New OS support: FreeBSD 14.1
• OpenEuler ARM architecture compatibility
• Introduced ICE driver migration for Linux DPLL interface usage in kernel 6.7
• Devlink support for tools algorithm improvement
• Ethtool flow-type ether support
• 40G ESXi new default VMDq loopback behavior and module parameter
• Message logs related to Health Status 0x110 updated
New Firmware Support
• Disable Optical Module Laser when Link/Port is disabled on E810
• GET_LLDP type command : get all ports LLDP information on E810.
• Disabling of port 0 (as long it’s not associated with PF 0).
• Use Rx Loss to detect cable disconnect from Module on E810
• Expanding i2c write handling to enable 4 bytes on E810
Removed Features:
• UEFI UNDI AVF driver support.
• Removed 100G ESXi configuration of VMDq loopback via intcli
Cheers• GET_LLDP type command : get all ports LLDP information on E810.
• Disabling of port 0 (as long it’s not associated with PF 0).
• Use Rx Loss to detect cable disconnect from Module on E810
• Expanding i2c write handling to enable 4 bytes on E810
Removed Features:
• UEFI UNDI AVF driver support.
• Removed 100G ESXi configuration of VMDq loopback via intcli
Tom
以下用户感谢了你: admin, Ataemonus
创建页面时间:0.084秒