Aquantia AQC107, AQC108, Firmware Version 3.1.56

An AQC111c factory firmware backup was posted here:
www.tonymacx86.com/threads/imac-pro-x299....255082/post-1909271
Note: a free account signup may be required in order to download.
Good luck.

tnk you so much!! but didnt work i get the same error whatever i do....

FLASH type = Macronix MX25L32
PHY could not be detected!
FLASH type = Macronix MX25L32
Bytes: 0x20000
Bytes: 0x20000
Bytes: 0x40000
Kickstarting MCP
FLASH type = Macronix MX25L32
Error kickstarting (mac = False, phy = True)!

so time to rma that mobo and dont use any firmware from other sites again.

I also managed to brick my AQC111c in my Maximus XI Formula but I managed to unbrick it.

What I did was use diag to flash the AQC108 firmware from the 1.5.xx
www.station-drivers.com/index.php?option...info&id=3306&lang=en
That fixes the MAC but the PHY is messed. I then flashed it with the original AQC111c firmware
- run diag
- choose 3 to flash
- 2 to update flash image
- then says MAC flash bdp and CLX bdp differ, I chose 1 which is flash
- then it says PHY flash bdp and CLX bdp differ, I chose 2 which is CLX
- shutdown, unplug power and restart

I will try that soon as get home! psy is messed up in mine too hope this works for me too now the lesson learned

My friend WORKSSSSSSS!!!!!!!!!!!!!!!!! im so so so greatful!!!!!!!!! one question the mac that fixed with 108 firware doesnt matter?

My friend WORKSSSSSSS!!!!!!!!!!!!!!!!! im so so so greatful!!!!!!!!! one question the mac that fixed with 108 firware doesnt matter?