Marvell/Aquantia AQC113CS (10Gbps) Firmware Version 1.5.45
- d5aqoep
-
- Offline
- poster 5
-

Enregistré
- 帖子: 21
- Thanks: 2
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
1 天 7 å°�æ—¶ å‰�The reflash doesn’t work because the updater does not see the correct four parts ID. So it doesn’t reset the card to start the flashing procedure. Am I missing something?
Please 登录 or 注册一个帐号 to join the conversation.
- jumpy76
-
- Offline
- poster 4
-

Enregistré
- 帖子: 16
- Thanks: 0
- admin
-
Topic Author
- Offline
- Admin
-

Administrateur
- Fdrsoft (Admin)
- 帖子: 584
- Thanks: 354
Re: Marvell/Aquantia AQC113CS (10Gbps) Firmware Version 1.5.45
1 天 5 �时 �
No, the AQC113 chipset has internal firmware.
Asus Z890 ProArt, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Steelserie Pro , Souris Razer, Boitier HUMMER, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Please 登录 or 注册一个帐号 to join the conversation.
- admin
-
Topic Author
- Offline
- Admin
-

Administrateur
- Fdrsoft (Admin)
- 帖子: 584
- Thanks: 354
Re: Marvell/Aquantia AQC113CS (10Gbps) Firmware Version 1.5.45
1 天 5 �时 �
d5aqoep
So the chipset is no longer detected in Windows?
Asus Z890 ProArt, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Steelserie Pro , Souris Razer, Boitier HUMMER, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Please 登录 or 注册一个帐号 to join the conversation.
- d5aqoep
-
- Offline
- poster 5
-

Enregistré
- 帖子: 21
- Thanks: 2
Re: Marvell/Aquantia AQC113CS (10Gbps) Firmware Version 1.5.45
1 天 5 �时 �
Chipset gets detected in Windows. The card comes up as QNAP QXG card with 2 x 10G Ports but there is an exclamation mark in device manager for both NICs. I can see it's HWID from device manager but the updater fails to fetch the 4 parts ID and is not even able to reset them to begin firmware installation.
Please 登录 or 注册一个帐号 to join the conversation.
创建页面时间:0.079秒

