Intel Rapid Storage Technology (RST) Version 17.x & 18.x

Galixte 写道：:

Take a look here: www.win-raid.com/t11f23-Modded-Intel-AHC...igitally-signed.html
 

Unfortunately these mod+signed drivers cannot be used from scratch, because the OS Setup only accepts WHQL certified third party drivers.

admin 写道：:

To you check if between the M2 & SATA ports none was shared (SATA1 & SATA2 or M2 A) see manual.
 

SSD Samsung 980 is installed on M2P-CPU so all SATA drives are available.
Still problem is unsolved but I think the problem is in a driver or maybe Windows cannot work ok with this driver. The great unknown.

 

Venom 写道：:

admin 写道：:

To you check if between the M2 & SATA ports none was shared (SATA1 & SATA2 or M2 A) see manual.

 

SSD Samsung 980 is installed on M2P-CPU so all SATA drives are available.
Still problem is unsolved but I think the problem is in a driver or maybe Windows cannot work ok with this driver. The great unknown.

 

Check first whether both SSD are recognized in the BIOS.
Also, according to the Diagram, SATA 3_1 is not available when you have an SSD in the M2_SB connected..

Cheers
Tom

Hello. Would appreciate any help please. I own a z490 FTW Evga motherboard and I'm going through a new install. I downloaded the latest package but I'm not 100% sure what to do at this point. Do I run the .exe file in each of these subfolders?  What do each of them stand for exactly?
My use case - I don't use raid or any intel branded ssd's. Do I still get some benefit for installing these then (I do have an ssd hooked up to M.2 slot)?