NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- Alien Invader
-
Offline
- Poster
-
Enregistré
- Posts: 7
- Thanks: 3
Replied by Alien Invader on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 1 year 2 months ago #1165
TiX which mainboard you have ? It seems to me that you are connected to a 5Gbit port, the name for 10Gbit should be different on chipgenius as I have the same 5Gbit connection and same HIGH SPEED indication.
My screenshot is with a M2 SATA on USB 3.0 5Gbit port (Z97)
*As the 2nd image says USB 3.2 Gen1 is in fact 5Gbit so the speed you have is pretty normal. The 10Gbit ones are called 3.2 Gen2.
My screenshot is with a M2 SATA on USB 3.0 5Gbit port (Z97)
*As the 2nd image says USB 3.2 Gen1 is in fact 5Gbit so the speed you have is pretty normal. The 10Gbit ones are called 3.2 Gen2.
Last Edit:1 year 2 months ago
by Alien Invader
Last edit: 1 year 2 months ago by Alien Invader.
Please Anmelden or Create an account to join the conversation.
Replied by kufa on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 1 year 2 months ago #1169
For anyone who has this case, I've written an answer file that works perfectly for it.
Inateck FE2025
Inateck.cfg
;Configure Start
;=================FW Configure=================
U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
VID = 0xbda
PID = 0x9210
MANUFACTURE = "Inateck"
PRODUCT = "FE2025"
SCSI_PRODUCT = "RTL9210B NVME"
SCSI_VENDOR = "Realtek"
;"0123" for Dec, "0x0123" for Hex, max 12 digits
;SN von Gehäuse anpassen - Adjust SN of Enclosure
SERIAL = "2F22AKA1"
DISK_HOTPLUG = 0x0
LED = 0x2
PINMUX1 = 0x0
PINMUX2 = 0x0
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x0
ASPMDIS = 0x0
;10 minutes of idle time will disable disk power
;Anpassen mit aus (false) oder Zeit in minuten. z.b. 10
;Adjust with off (false) or time in minutes. E.g. 10
DISK_IPS_THRES = false
;EN_UPS = n/a
;PD = n/a
HW_LED_CFG = false
CUSTOMIZED_LED is 15 bytes = 0x80000081
CUSTOMIZED_LED = 07 00
SUSPEND_LED_OFF = 0x0
FAN = false
DIS_SHOW_EMPTY_DISK = false
FORCE_SATA_NORMAL_DMA = false
UART_DBG_PIN = 0x5
FINGER_PRINT_EN = false
;=================Tool Configure=================
DISCONN_FORCE_USB2 = 0x0
FORMAT_DISK = n
INC_SERIAL = false
;PARTITION: GPT, MBR
PARTITION = "GPT"
;FORMAT: NTFS, exFAT
FORMAT = "exFAT"
;LABEL max allowed - characters
LABEL = "Inateck m2"
Boot Mode = false
FW Ver = 1
FW Build Date = 2023
IC Ver = 0xa0010002
Disconn_ForceUSB2 = 0x0
Inateck FE2025
Inateck.cfg
Warning: Spoiler!
;Configure Start
;=================FW Configure=================
U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
VID = 0xbda
PID = 0x9210
MANUFACTURE = "Inateck"
PRODUCT = "FE2025"
SCSI_PRODUCT = "RTL9210B NVME"
SCSI_VENDOR = "Realtek"
;"0123" for Dec, "0x0123" for Hex, max 12 digits
;SN von Gehäuse anpassen - Adjust SN of Enclosure
SERIAL = "2F22AKA1"
DISK_HOTPLUG = 0x0
LED = 0x2
PINMUX1 = 0x0
PINMUX2 = 0x0
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x0
ASPMDIS = 0x0
;10 minutes of idle time will disable disk power
;Anpassen mit aus (false) oder Zeit in minuten. z.b. 10
;Adjust with off (false) or time in minutes. E.g. 10
DISK_IPS_THRES = false
;EN_UPS = n/a
;PD = n/a
HW_LED_CFG = false
CUSTOMIZED_LED is 15 bytes = 0x80000081
CUSTOMIZED_LED = 07 00
SUSPEND_LED_OFF = 0x0
FAN = false
DIS_SHOW_EMPTY_DISK = false
FORCE_SATA_NORMAL_DMA = false
UART_DBG_PIN = 0x5
FINGER_PRINT_EN = false
;=================Tool Configure=================
DISCONN_FORCE_USB2 = 0x0
FORMAT_DISK = n
INC_SERIAL = false
;PARTITION: GPT, MBR
PARTITION = "GPT"
;FORMAT: NTFS, exFAT
FORMAT = "exFAT"
;LABEL max allowed - characters
LABEL = "Inateck m2"
Boot Mode = false
FW Ver = 1
FW Build Date = 2023
IC Ver = 0xa0010002
Disconn_ForceUSB2 = 0x0
by kufa
The following user(s) said Thank You: admin
Please Anmelden or Create an account to join the conversation.
Replied by TiX on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 1 year 2 months ago #1170Using a MSI katana gf66 notebook the mainboard is "msi MS-1584"TiX which mainboard you have ? It seems to me that you are connected to a 5Gbit port, the name for 10Gbit should be different on chipgenius as I have the same 5Gbit connection and same HIGH SPEED indication.
My screenshot is with a M2 SATA on USB 3.0 5Gbit port (Z97)
*As the 2nd image says USB 3.2 Gen1 is in fact 5Gbit so the speed you have is pretty normal. The 10Gbit ones are called 3.2 Gen2.
by TiX
Please Anmelden or Create an account to join the conversation.
Replied by admin on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 1 year 2 months ago #1171
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
by admin
Please Anmelden or Create an account to join the conversation.
Replied by admin on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 1 year 2 months ago #1172
" Using a MSI katana gf66 notebook the mainboard is "msi MS-1584" "
If your box is well connected in USB 3.2, try to see if your disk, what model is it?
Otherwise you can try to update but I don't know if that solves your problem, to see
If your box is well connected in USB 3.2, try to see if your disk, what model is it?
Otherwise you can try to update but I don't know if that solves your problem, to see
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
by admin
Please Anmelden or Create an account to join the conversation.
Time to create page: 0.177 seconds