Asmedia ASM-2364 NVMe/USB 3.2 Controller firmware Version 230927_91_00_00

@Shonk

AS_PCIE_230927_91_00_00.bin (2 of my devices came with this firmware)
Directly Dumped from my Samget Enclosure (ASM2364)

hi, i have the same enclousere
Do you know what is fixed for this fw version ?
About the issue you had with the enclouser is specific of the PM9B1 ?

its specific to the PM9B1 and is the same with any ASM2364 firmware

@Shonk
Thanks!
I have successfully updated ORICO-M233C3-G4 with ASM2362 to AS_PCIE_230927_91_00_00.bin

@Shonk

AS_PCIE_230927_91_00_00.bin (2 of my devices came with this firmware)

Directly Dumped from my Samget Enclosure (ASM2364)

works fine here, thanks for share.

Do you know the  thickness, and thermal characteristics of the thermal pad provided in the package with the enclosure, in case I need to replace it ?
My enclouser at idle report 35°C, seem a bit hight ....

Its just your usual generic china 5 W/mk pad at a guess 1 or 1.5mm you need as thick as it takes to close the enclosure with a slight bit of pressure but not to much
to thin and it wont transfer the heat

35°C is fine its in an enclosure not a huge pc with airflow 75°C is high

MY Axe Speedy+ 1TB usb stick is 63°C at idle that thing is hot
your cooler than all of my ssd's in my main pc which has 6 140mm case fans
and a small fan blowing over the ssd's

Intel Optane 900P 480GB 39°C M.2
Intel Optane 900P 480GB 36°C U.2
Samsung 990 Pro 4TB 42°C M.2
Samsung 990 Pro 2TB 41°C M.2
Samsung 990Pro 2TB 43°C M.2
Samsung 980Pro 2TB 43°C M.2
AXE Speedy+ 1TB 63°C USB Stick