Firmware 1.94 (i225-V)
- ppanthagod
- Offline
- Newbie
-
Enregistré
- 게시물: 4
- Thanks: 0
Re: Firmware 1.94 (i225-V)
3 주 5 일 전
Guys i think i bricked my NIC. Flashed it with FW from this topic. Tried to downgrade and now i have NIC Start Failure. Has someone original DUMP from I225-V REV03 from an Z690 ASUS Board?
I tried all FWs and i dont know how to use -f command. Thx
I tried all FWs and i dont know how to use -f command. Thx
Please Log in or 회원가입하기! to join the conversation.
- admin
- Offline
- Admin
-
Administrateur
- 게시물: 690
- Thanks: 358
Re: Firmware 1.94 (i225-V)
3 주 5 일 전
try reflashing the bios hoping it will put back the old firmware, is it still recognized?
Before updating, check carefully that the firmware concerns Rev 1.x, rev 2.x or 3.x.
Before updating, check carefully that the firmware concerns Rev 1.x, rev 2.x or 3.x.
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Please Log in or 회원가입하기! to join the conversation.
- ppanthagod
- Offline
- Newbie
-
Enregistré
- 게시물: 4
- Thanks: 0
- oemuser
- Offline
- Poster Pro
-
Enregistré
- 게시물: 20
- Thanks: 15
Re: Firmware 1.94 (i225-V)
3 주 5 일 전 - 3 주 5 일 전
What NVM version were you in?
What Asus Z690 model?
Did you made backups...no, irresponsible stupid action then...
If its in the device manager, its a good sign...
Basic cmds here
EEUPDATEW64e.exe /nic=1 /eepromver (optional output to file: nic.log/txt)
nvmupdatew64e.exe -i -l (optional output to file: nic.log/txt)
Read the other thread about the 1.89 FW , similar issues from users and how were recovered may help.
The reflash BIOS option will probably not going to work...
What Asus Z690 model?
Did you made backups...no, irresponsible stupid action then...
If its in the device manager, its a good sign...
Basic cmds here
EEUPDATEW64e.exe /nic=1 /eepromver (optional output to file: nic.log/txt)
nvmupdatew64e.exe -i -l (optional output to file: nic.log/txt)
Read the other thread about the 1.89 FW , similar issues from users and how were recovered may help.
The reflash BIOS option will probably not going to work...
Last edit: 3 주 5 일 전 by oemuser.
Please Log in or 회원가입하기! to join the conversation.
- ppanthagod
- Offline
- Newbie
-
Enregistré
- 게시물: 4
- Thanks: 0
Re: Firmware 1.94 (i225-V)
3 주 5 일 전 - 3 주 5 일 전It was 1.89 before 1.94 updateWhat NVM version were you in?
What Asus Z690 model?
Did you made backups...no, irresponsible stupid action then...
If its in the device manager, its a good sign...
Basic cmds here
EEUPDATEW64e.exe /nic=1 /eepromver (optional output to file: nic.log/txt)
nvmupdatew64e.exe -i -l (optional output to file: nic.log/txt)
Read the other thread about the 1.89 FW , similar issues from users and how were recovered may help.
The reflash BIOS option will probably not going to work...
ROG STRIX Z690-A GAMING WIFI D4 so REV03
i have a Realtek PCI Card what i am using most of the time, just tried to fix the connection losses before i sell the board. I can start the flash process but it says RAM is unassigned or something, i cant force the update -f, it says wrong or bad parameter.
Last edit: 3 주 5 일 전 by ppanthagod.
Please Log in or 회원가입하기! to join the conversation.
페이지 생성 시간: 0.082 초