ssd Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55

  • sdefrwggerg
  • Avatarul lui sdefrwggerg
  • Deconectat
  • Big Poster
  • Big Poster
    Enregistré
  • Postări: 42
  • Thanks: 22

Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55

acum 2 săptămâni 2 zile
#5251
UGREEN Housing with an RGB light strip. When the housing transmits data, the color gradient of the RGB light is automatically generated.
So they RGB IC communicates with RTL via bus to change the light. So you need Special Firmware or / and API communication and i think it is different to sabrent.
Următorul utilizator(ori) v-au spus Mulțumesc: programervn

Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.

  • admin
  • Avatarul lui admin Autor Subiect
  • Plecat
  • Admin
  • Admin
    Administrateur
  • Postări: 443
  • Thanks: 211

Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55

acum 2 săptămâni 2 zile - acum 2 săptămâni 2 zile
#5252
 

Yes, the Ugreen case is definitely more beautiful, I think.

on the other hand it heats up hence I added silicone paste above (normal) but below and under the realtek chipset to have contact with the aluminum case

Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Ultima editare: acum 2 săptămâni 2 zile de către admin.

Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.

  • programervn
  • Avatarul lui programervn
  • Deconectat
  • poster 4
  • poster 4
    Enregistré
  • Postări: 17
  • Thanks: 2

Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55

acum 2 săptămâni 2 zile
#5253
You can remove the mainboard by releasing the clips as shown in the picture I shared in the previous post. However, it’s very difficult to keep the case in its original condition, as it will get scratched when pried open. I managed to remove it successfully and added a thermal pad for the chipset. The sturdy design makes it quite difficult to take apart 
Yes, the Ugreen case is definitely more beautiful, I think.

on the other hand it heats up hence I added silicone paste above (normal) but below and under the realtek chipset to have contact with the aluminum case
Următorul utilizator(ori) v-au spus Mulțumesc: admin

Vă rugăm Autentificare sau Crează un cont să participaţi la discuţie.

Timp creare pagină: 0.077 secunde
Motorizat de Forum Kunena