News

Downloads: 0
Downloads: 14
Downloads: 10
Downloads: 82
Downloads: 118

Top Download

Downloads: 56487
Downloads: 25125
Downloads: 22117
Downloads: 20145
Downloads: 19714

📣INFORMATION

Hello everyone,
I'm once again asking for your generosity, as S-D is facing retirement by the end of July 2025 due to lack of income.
Thank you all for your generosity; even a little means a lot and allows me to continue my passion with you.
Thank you again, a thousand times over.😉

ssd S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

  • rococoricoco
  • rococoricoco-ov Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Príspevky: 5
  • Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

pred 1 mesiacom 2 týždnami - pred 1 mesiacom 2 týždnami
#4639
But I have previously upgraded to version 1.32.xxxxxx and nothing happened. The S.M.A.R.T display feature is working properly. Is it because I checked the PG to update? Because the dump file is a little bit different when I compare it before and after.
Posledný krát upravené:pred 1 mesiacom 2 týždnami rococoricoco

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • admin
  • admin-ov Avatar Autor témy
  • Neprítomný
  • Admin
  • Admin
    Administrateur
  • Príspevky: 352
  • Thanks: 133

Re: S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

pred 1 mesiacom 2 týždnami - pred 1 mesiacom 2 týždnami
#4640
If the display isn't working at first, it's likely due to a disk compatibility issue and firmware.
  • Shonk   is the best person to answer this question. 
    [img
Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Posledný krát upravené:pred 1 mesiacom 2 týždnami admin

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • rococoricoco
  • rococoricoco-ov Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Príspevky: 5
  • Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

pred 1 mesiacom 2 týždnami - pred 1 mesiacom 2 týždnami
#4664
Hope he sees this post and can help. I’m very frustated with this.
Posledný krát upravené:pred 1 mesiacom 2 týždnami rococoricoco

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • Laroldski
  • Laroldski-ov Avatar
  • Offline
  • Big Poster
  • Big Poster
    Enregistré
  • Príspevky: 55
  • Thanks: 12

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

pred 1 mesiacom 1 týždňom - pred 1 mesiacom 1 týždňom
#4678
rococoricoco napísal:
Hope he sees this post and can help. I’m very frustated with this.

If your enclosure can't be fixed you may want to look at these enclosure's,I have had good luck with JEYI enclosure's plus you can purchase replacement PCB boards if the USB-C connector get's damaged.

This JEYI enclosure is better then most from what I have found because the backplate is around 2.5mm thick and carries away the heat better.

www.aliexpress.com/item/1005005977099067...arch%7Cquery_from%3A

These are replacement PCB boards you can get that are a direct fit.

www.aliexpress.com/item/1005008197399518...arch%7Cquery_from%3A

 
Posledný krát upravené:pred 1 mesiacom 1 týždňom Laroldski Dôvod: Forgot to include a second link.

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • halveeen
  • halveeen-ov Avatar
  • Offline
  • Newbie
  • Newbie
    Enregistré
  • Príspevky: 1
  • Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325 

pred 1 týždňom 4 dňami
#4852
Hello everyone, please I need help

My SSD Case "RTL9210B-CG  firmware version (22.1d / 1.34.29)" only works on USB 2.0 once its connected to usb3.1 I see the device in device manager but the SSD will not appear in file explorer

Original Dump
Code:
************************************************************** Device : [Port2] : Realtek RTL9210B-CG #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "RTL9210B-CG" SERIAL : "012345679457" SCSI_PRODUCT : "RTL9210B-CG     " SCSI_VENDOR : "Realtek " LED : 0x02 DISK_IPS_THRES : 0x0a CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00  UART_DBG_PIN : 0x05 ... Boot Mode : Flash FW Ver : 1.32.70 FW Build Date : 2023.07.06 IC Pkg Type : PCIE/SATA Disconn_ForceUSB2 : false ...


Truncated for brevity...I removed all that had n/a

New firmware installed today dump
Code:
************************************************************** Device : [Port2] : Realtek RTL9210B-CG #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "RTL9210B-CG" SERIAL : "012345679458" SCSI_PRODUCT : "RTL9210B-CG     " SCSI_VENDOR : "Realtek " USB_SELF_PWR : n/a DISK_HOTPLUG : n/a LED : n/a PINMUX1 : n/a PINMUX2 : n/a U2_MAXPWR : n/a U3_MAXPWR : n/a ASPMDIS : n/a PCIE_REFCLK : n/a DISK_IPS_THRES : n/a SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00  SUSPEND_LED_OFF : n/a FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : n/a FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x05 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a Boot Mode : Flash FW Ver : 1.34.29 FW Build Date : 2025.01.13 IC Pkg Type : PCIE/SATA UUID : n/a Disconn_ForceUSB2 : false


I don't know if I am posting this in the right channel, just signed up today...but yh I need help figuring why my SSD does not work on USB3 only USB 2

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

Čas vytvorenia stránky: 0.084 sekúnd
Funguje na Kunena fórum