Forum New Messages

News

Downloads: 548
Downloads: 80
Downloads: 129
Downloads: 156
Downloads: 833
--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

  • wade7575
  • wade7575-ov Avatar
  • Offline
  • Best Poster
  • Best Poster
    Enregistré
  • Príspevky: 45
  • Thanks: 7

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

pred 1 rokom 4 mesiacmi
#999
You may want to look at getting a new enclosure and just cutting your loss's with this one. napísal: Thanks for your kind suggestions.

IIRC, I read about that "shorting pins" method to flash bricked devices some time ago. Fortunately, as I explained in my message, my unit was only semi-bricked, and I could flash another version without issue. Maybe I should tinker more with my device, to see if that error when flashing the latest firmware was only a glitch or it's some compatibility issue that just made the flashing process impossible.

I use a quality aftermarket cable from Anker. And previously I had flashed my unit several times, always without issue. So I tend to think the cable is not to blame here.

Best wishes.

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • admin
  • admin-ov Avatar Autor témy
  • Neprítomný
  • Admin
  • Admin
    Administrateur
  • Príspevky: 699
  • Thanks: 361

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

pred 1 rokom 4 mesiacmi
#1000
Me on my side, I never had problems with 5 different boxes with the RTL9210
The problem can also come from elsewhere
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • ethereal
  • ethereal-ov Avatar
  • Offline
  • Poster
  • Poster
    Enregistré
  • Príspevky: 10
  • Thanks: 1

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

pred 1 rokom 4 mesiacmi - pred 1 rokom 4 mesiacmi
#1010
wade7575, as I've explained, my enclosure is working fine. I only had an issue trying to flash a specific firmware version (the latest available so far). Flashing an older version went fine and my unit was working without issues again.
[img


Thanks anyway for your suggestion.
Posledný krát upravené:pred 1 rokom 4 mesiacmi ethereal

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • ethereal
  • ethereal-ov Avatar
  • Offline
  • Poster
  • Poster
    Enregistré
  • Príspevky: 10
  • Thanks: 1

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

pred 1 rokom 4 mesiacmi
#1011
admin napísal:
Me on my side, I never had problems with 5 different boxes with the RTL9210
The problem can also come from elsewhere
 
If I understand you correctly, you have flashed successfully version V1.31.17 on all those 5 without any issue?

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

  • wade7575
  • wade7575-ov Avatar
  • Offline
  • Best Poster
  • Best Poster
    Enregistré
  • Príspevky: 45
  • Thanks: 7

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

pred 1 rokom 4 mesiacmi
#1014
ethereal napísal:
wade7575, as I've explained, my enclosure is working fine. I only had an issue trying to flash a specific firmware version (the latest available so far). Flashing an older version went fine and my unit was working without issues again.
[img


Thanks anyway for your suggestion.

I missed where you said it is working fine,did you use the right configure file for your enclosure.
 

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

Čas vytvorenia stránky: 0.081 sekúnd
Funguje na Kunena fórum