--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
Marvell AQC113C FourPartID Firmware updater edit
- Shonk
- Autor témy
- Offline
- Super Utilisateur
-
Enregistré
- Príspevky: 118
- Thanks: 42
Re: Marvell AQC113C FourPartID Firmware updater edit
pred 3 mesiacmi 3 týždnami
i had to desolder the chip on both of my cards
it wont dump properly still on card it introduces random corruption
it wont dump properly still on card it introduces random corruption
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- Gh0st
- Offline
- Newbie
-
Enregistré
- Príspevky: 3
- Thanks: 0
Re: Marvell AQC113C FourPartID Firmware updater edit
pred 3 mesiacmi 2 týždnami
Hello, I also have the Z690 Aorus Master and yesterday I updated the firmware from 1.3.36 to 1.5.38.
Now the network card is no longer accessible, neither under Windows nor under Debian.
How can I fix this?
I was able to save the hardware ID:
Connected to device “0000-03:00.0”
FourPartIDs:0x1D6A:0x14C0:0x1458:0xE000.
What was strange was that the firmware version wasn't displayed under Windows, but it was displayed under Debian.
Finally I flashed it with Windows.
It ist the Marvel Aqtion ACQ113C 10GbE LAN Chip.
Now the network card is no longer accessible, neither under Windows nor under Debian.
How can I fix this?
I was able to save the hardware ID:
Connected to device “0000-03:00.0”
FourPartIDs:0x1D6A:0x14C0:0x1458:0xE000.
What was strange was that the firmware version wasn't displayed under Windows, but it was displayed under Debian.
Finally I flashed it with Windows.
It ist the Marvel Aqtion ACQ113C 10GbE LAN Chip.
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- admin
- Offline
- Admin
-
Administrateur
- Príspevky: 741
- Thanks: 374
Re: Marvell AQC113C FourPartID Firmware updater edit
pred 3 mesiacmi 2 týždnami
Hi, have you tried reflashing the bios then in the setup is it active?
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- Gh0st
- Offline
- Newbie
-
Enregistré
- Príspevky: 3
- Thanks: 0
Re: Marvell AQC113C FourPartID Firmware updater edit
pred 3 mesiacmi 2 týždnami
Yes, Bios Version is F28, and Network card is on active. But no output at Windows DeviceManager or in Debian
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- admin
- Offline
- Admin
-
Administrateur
- Príspevky: 741
- Thanks: 374
Re: Marvell AQC113C FourPartID Firmware updater edit
pred 3 mesiacmi 2 týždnami
Have you done a clear CMOS or reflash the bios in case
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
Čas vytvorenia stránky: 0.077 sekúnd