--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

Marvell AQC113C FourPartID Firmware updater edit

Gh0st
Offline
Newbie
Enregistré
Príspevky: 3
Thanks: 0

Re: Marvell AQC113C FourPartID Firmware updater edit

pred 3 mesiacmi 2 týždnami

#3193

First i clear CMOS and second i reflashed ist because there was an bios update from F28c to F28.

now i configured the bios from scratch and network is enabled but the device manager not showing the 10g network....

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

admin
Neprítomný
Admin
Administrateur
Príspevky: 741
Thanks: 374

Re: Marvell AQC113C FourPartID Firmware updater edit

pred 3 mesiacmi 2 týždnami - pred 3 mesiacmi 2 týždnami

#3194

Try Marvell diagnostics to see if it is active and just needs to be done in recovery

Fix a bricked/dead AQC107 NIC after firmware update gone wrong | Bill Haofei Gong's Blog (billgong.com)

Configuration

Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Posledný krát upravené:pred 3 mesiacmi 2 týždnami admin

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

kitkatdarkchocolate
Offline
Newbie
Enregistré
Príspevky: 1
Thanks: 0

Re: Marvell AQC113C FourPartID Firmware updater edit

pred 2 mesiacmi 3 dňami - pred 2 mesiacmi 3 dňami

#3493

Hi,
I am facing a similar situation with this IC. I do not need a firmware update, but I require ASPM support for this chip.
I have a question about the PHY and MAC addresses from the XML file and would appreciate your suggestions.It seems that I need to add a line to include my device, as none of the downloaded files contain my FourPartID, which is:
0x1d6a 0x04c0 0x1d6a 0x0001.
This ID comes from Ugreen's new NAS lineup, the DXP4800 Plus.
I am wondering what reference number I should use to reflect the current MAC address of the machine.
There appear to be two kinds of addresses. Could you clarify what they are?
For example, here is the XML from version 1.3.33, which I plan to use as an upgrade FW:
<bdp id="2">
<hwids>
<pciid vid="1d6a" did="04c0" sdid="8094" svid="1bcf"/>
</hwids>
<mac>01000c0004000000000044000000440002000c00000300004adb9ca1ffffffff</mac>
<phy>0301040200e4020003001cc474b1ffff1dc474b1ffff1ec40100ffff</phy>
<exprom>True</exprom>
<image>AQC113-DirtyWake_Bx_ASPM_Enabled-1.3.33_bdp_aqsign.clx</image>
</bdp>

Additionally, I plan to dump the EEPROM files beforehand to avoid bricking the device. Are there any extra steps I should take to ensure this process is safe?

FYI, I have tried various methods to enable ASPM on the current motherboard, but none of them have worked. Below are the

Code:

lspci -vv -nn

results if you're interested. You can see "ASPM not supported" under "LinkCap:".

Upozornenie: Informácia, ktorú nemusíte chcieť zobraziť!

03:00.0 Ethernet controller [0200]: Aquantia Corp. AQtion AQC113 NBase-T/IEEE 802.3an Ethernet Controller [Antigua 10G] [1d6a:04c0] (rev 03)

Subsystem: Aquantia Corp. Device [1d6a:0001]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 16

IOMMU group: 14

Region 0: Memory at 80800000 (64-bit, non-prefetchable)

=512K%Region 2: Memory at 808a0000 (64-bit, non-prefetchable)

=4K%Region 4: Memory at 80400000 (64-bit, non-prefetchable)

=4M%Expansion ROM at 80880000 [disabled]

=128K%Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable- Count=1/32 Maskable+ 64bit+

Address: 0000000000000000 Data: 0000

Masking: 00000000 Pending: 00000000

Capabilities: [70] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 25W

DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-

RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-

LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM not supported

ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+

LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+

ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 8GT/s (downgraded), Width x2 (downgraded)

TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR+

10BitTagComp+ 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix-

EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

FRS- TPHComp- ExtTPHComp-

AtomicOpsCap: 32bit- 64bit- 128bitCAS-

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 10BitTagReq- OBFF Disabled,

AtomicOpsCtl: ReqEn-

LnkCap2: Supported Link Speeds: 2.5-16GT/s, Crosslink- Retimer+ 2Retimers+ DRS-

LnkCtl2: Target Link Speed: 16GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+

EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-

Retimer- 2Retimers- CrosslinkRes: Upstream Port

Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-

Vector table: BAR=2 offset=00000000

PBA: BAR=2 offset=00000200

Capabilities: [d0] Vital Product Data

Product Name: Marvell AQtion Network Adapter

Read-only fields:

[PN] Part number: 00B1E113

[V0] Vendor specific: MAC Addr: 6C:1F:F7:XX:XX:XX

[V1] Vendor specific: Bundle Version: 1.3.31

[V2] Vendor specific: Fw Version: 1.0.121

[RV] Reserved: checksum good, 0 byte(s) reserved

End

Capabilities: [100 v2] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+

AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-

MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-

HeaderLog: 00000000 00000000 00000000 00000000

Capabilities: [148 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed+ WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff

Status: NegoPending- InProgress-

Capabilities: [168 v1] Device Serial Number 00-00-00-00-00-00-00-00

Capabilities: [178 v1] Secondary PCI Express

LnkCtl3: LnkEquIntrruptEn- PerformEqu-

LaneErrStat: 0

Capabilities: [198 v1] Physical Layer 16.0 GT/s <?>

Capabilities: [1bc v1] Lane Margining at the Receiver <?>

Capabilities: [1d4 v1] Latency Tolerance Reporting

Max snoop latency: 3145728ns

Max no snoop latency: 3145728ns

Capabilities: [1dc v1] L1 PM Substates

L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+

PortCommonModeRestoreTime=10us PortTPowerOnTime=14us

L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+

T_CommonMode=0us LTR1.2_Threshold=96256ns

L1SubCtl2: T_PwrOn=44us

Capabilities: [1ec v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?>

Capabilities: [2ec v1] Data Link Feature <?>

Capabilities: [2f8 v1] Precision Time Measurement

PTMCap: Requester:+ Responder:- Root:-

PTMClockGranularity: Unimplemented

PTMControl: Enabled:+ RootSelected:-

PTMEffectiveGranularity: 4ns

Capabilities: [304 v1] Vendor Specific Information: ID=0003 Rev=1 Len=054 <?>

Kernel driver in use: atlantic

Kernel modules: atlantic

Thanks.

Posledný krát upravené:pred 2 mesiacmi 3 dňami kitkatdarkchocolate

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

Shonk
Autor témy
Offline
Super Utilisateur
Enregistré
Príspevky: 118
Thanks: 42

Re: Marvell AQC113C FourPartID Firmware updater edit

pred 2 mesiacmi 1 dňom

#3509

Sorry i cant help im not sure exactly how it works
hence my problems updating mine

if you work it out plz let me know

remember you have to pull the flash chip to back it up
you get corrupt data trying to dump it in situ

Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.

Čas vytvorenia stránky: 0.078 sekúnd

Funguje na Kunena fórum

News

Top Download

--- SURVEY Are you satisfied with the S-D site? ---

Marvell AQC113C FourPartID Firmware updater edit

Re: Marvell AQC113C FourPartID Firmware updater edit

Re: Marvell AQC113C FourPartID Firmware updater edit

Re: Marvell AQC113C FourPartID Firmware updater edit

Re: Marvell AQC113C FourPartID Firmware updater edit