Marvell/Aquantia AQC113CS (10Gbps) Firmware Version 1.5.45
- Shonk
-
- Offline
- The Best Poster
-

Enregistré
- Príspevky: 141
- Thanks: 62
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
pred 1 dňom 10 hodinami
use iperf z390 can only get 6.7gbps of actual throughput on pcie 3.0 x1 after overheads maybe you will get more on a pch that has more bandwidth
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- BrN
-
- Offline
- Poster 2
-

Enregistré
- Príspevky: 9
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
pred 1 dňom 7 hodinami
Je ne comprends pas ce qu'il faut modifier. Mon périphérique correspond bien à cette configuration # 3. VID=0x1D6A, DID=0x04C0, SVID=0x1D6A, SDID=0x0001
Mais il me dit device not match. Une idée ?
Mais il me dit device not match. Une idée ?
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- admin
-
Autor témy
- Neprítomný
- Admin
-

Administrateur
- Fdrsoft (Admin)
- Príspevky: 583
- Thanks: 354
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
pred 1 dňom 4 hodinami - pred 1 dňom 4 hodinami
Il faut modifier les deux lignes du fichier flashUpdateScript.ps1
Voici le fichier modifier si besoin
Voici le fichier modifier si besoin
Táto príloha je pre hostí neprístupná.
Prosím, pre jej zobrazenie sa prihláste alebo zaregistrujte.
Prosím, pre jej zobrazenie sa prihláste alebo zaregistrujte.
Asus Z890 ProArt, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Steelserie Pro , Souris Razer, Boitier HUMMER, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Posledný krát upravené:pred 1 dňom 4 hodinami admin
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- BrN
-
- Offline
- Poster 2
-

Enregistré
- Príspevky: 9
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
pred 1 dňom 4 hodinami
Merci pour ton retour et le temps passé.
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
- jumpy76
-
- Offline
- poster 4
-

Enregistré
- Príspevky: 16
- Thanks: 0
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
pred 1 dňom 3 hodinami
Please try this file after renaming it to .ps1 (not.jpg).
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Prosím Prihlásiť alebo Registrácia pre zdieľanie konverzácie.
Čas vytvorenia stránky: 0.077 sekúnd

