Realtek RTL9201R Firmware 1.32.7

  • Shonk
  • Shonk's Ảnh đại diện Topic Author
  • Tắt
  • The Best Poster
  • The Best Poster
    Enregistré
  • Tổng số bài viết: 157
  • Thanks: 69

Re: Realtek RTL9201R Firmware 1.32.7

4 ngày 3 tiếng trước
#
I would try and get the updater first to roll back to 9.34.11

You have a variant btw its RTL9201 no R
it most prob takes the same firmware so should be fine but no guarantees
yes spi is the chip that stores the firmware for the chip i dumped mine with a ch341a flash programmer

here's how all mine id
The following user(s) said Thank You: jelb0

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • Shonk
  • Shonk's Ảnh đại diện Topic Author
  • Tắt
  • The Best Poster
  • The Best Poster
    Enregistré
  • Tổng số bài viết: 157
  • Thanks: 69

Re: Realtek RTL9201R Firmware 1.32.7

4 ngày 3 tiếng trước
#
the SPI is the Puya chip it holds the firmware for the RTL9201R
there's a really old firmware built into the RTL9201 that it can also boot off in a limp mode if that firmware is missing

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • jelb0
  • jelb0's Ảnh đại diện
  • Tắt
  • poster 3
  • poster 3
    Enregistré
  • Tổng số bài viết: 11
  • Thanks: 2

Re: Realtek RTL9201R Firmware 1.32.7

2 ngày 15 tiếng trước
#
I would try and get the updater first to roll back to 9.34.11

You have a variant btw its RTL9201 no R
it most prob takes the same firmware so should be fine but no guarantees
 
I'm in touch with Jeyi and they say they will send me a firmware update to fix the problem. I'll share it here of course.
The following user(s) said Thank You: Shonk

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

  • Shonk
  • Shonk's Ảnh đại diện Topic Author
  • Tắt
  • The Best Poster
  • The Best Poster
    Enregistré
  • Tổng số bài viết: 157
  • Thanks: 69

Re: Realtek RTL9201R Firmware 1.32.7

1 ngày 13 tiếng trước - 1 ngày 12 tiếng trước
#
any luck yet?

Oh btw the RTL9201R reports that it is USB 3.2 Gen2 but is hardware Capped at USB 3.2 Gen1 via some sort of hardware level lockout
so its Speed is capped at SATA of around 439 MB/s 

By the looks of it the RTL9201 non R is allowed to link at USB 3.2 Gen2 to allow the full speed of around 535 MB/s



Last edit: 1 ngày 12 tiếng trước by Shonk.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

Thời gian tải trang: 0.077 giây
Powered by Kunena Forum