I have bought a cheap
ORICO PWM2-G2 enclosure, because I don't need it very often and transfer rate is pretty much the same to some other ones, that be much more expensive. Because it also has an
RTL9210B-Chip and at the end of the day this is the core of each enclosure.
image missing https://abload.de/img/orico8oirc.jpg
- Material - Aluminum Alloy + ABS
- Color - Black/Blue/Pink/Silver
- Dimension - 124(L)*35mm(W)*14mm(H)
- Input Interface - M-Key/B&M-Key
- Output Interface - Type-C (USB3.2 Gen2)
- Transmission Rate - 10Gbps
- Installation - Tool-free
- Support Capacity - 4TB Max
It came with
Firmware 1.23.15.
For some of them, who missed to
dump the original data before updating, here it is:
The serial is all the same at this enclosure. To set the serial to
"012345679039" you have to write
"012345679038" into your config file.
I have flashed the firmware version
1.32.49.140423
cfg-File looks like this:
This is the result (BTW, I don't use the cable which was included but a TB3-cable from Lenovo and connected to a TB4 port of my laptop.):
image missing https://abload.de/img/ori_nvme_01deiru.jpg
Topic Author
