--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- Shonk
- Tắt
- Super Utilisateur
-
Enregistré
- Tổng số bài viết: 118
- Thanks: 42
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
3 tuần 3 ngà y trước
it must have come with a bad nvram then (cfg)
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
- Shonk
- Tắt
- Super Utilisateur
-
Enregistré
- Tổng số bài viết: 118
- Thanks: 42
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
3 tuần 3 ngà y trước
Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such
Here's one as an example
Here's one as an example
Code:
;Configure Start
;=================FW Configure=================
U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
VID = 0xbda
PID = 0x9210
MANUFACTURE = "Samsung"
SCSI_VENDOR = "Samsung"
PRODUCT = "Samsung SSD PM9A1 1TB"
SCSI_PRODUCT = "SSD PM9A1 1TB"
SERIAL = "S641NX0TB24240"
DISK_HOTPLUG = 0x0
PINMUX1 = 0x70000
PINMUX2 = 0x0
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x70
ASPMDIS = 0x0
;SUSPEND_DISK_OFF = 1
;10 minutes of idle time will disable disk power
DISK_IPS_THRES = 10
;EN_UPS = 0x0
;PD = 0x0
LED = 0x1
;HW_LED_CFG = 0x0
;CUSTOMIZED_LED is 15 bytes
;CUSTOMIZED_LED = 01 01
;SUSPEND_LED_OFF = 0x0
;FAN = 0x0
;DIS_SHOW_EMPTY_DISK = 0x1
;FORCE_SATA_NORMAL_DMA = 0x0
UART_DBG_PIN = 5
;FINGER_PRINT_EN = n
;=================Tool Configure=================
;DISCONN_FORCE_USB2 = n
FORMAT_DISK = n
;INC_SERIAL = y
;PARTITION: GPT, MBR
PARTITION = "MBR"
;FORMAT: NTFS, exFAT
FORMAT = "NTFS"
;LABEL max allowed - characters
LABEL = "My USB"
The following user(s) said Thank You: pt83
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
- pt83
- Tắt
- Poster
-
Enregistré
- Tổng số bài viết: 7
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
3 tuần 3 ngà y trướcI want to add GUID is that possible? Orico Box a few years ago do have GUID but newer one doesn't have. Which is needed for my UnraidOS to accept the license linking.Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
- yasins
- Tắt
- Newbie
-
Enregistré
- Tổng số bài viết: 2
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
3 tuần 2 ngà y trước
Hello! Please file send to me E-Mail will be to sent PM
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
- yasins
- Tắt
- Newbie
-
Enregistré
- Tổng số bài viết: 2
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 tuần 5 ngà y trước - 1 tuần 5 ngà y trước
Good day, Is it possible to change the IC Pkg Type section of the box and get SATA feature in the box? Is such a thing possible? There is also Realtek rtl9210b-CG SATA support, which is normally found on the box., so I set the firmware to 1.33.44. Model : M2PV-C3
Code:
**************************************************************
Device : [Port4] : Realtek RTL9210B-CG #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9210
MANUFACTURE : "Realtek"
PRODUCT : "Realtek"
SERIAL : "012345678909"
SCSI_PRODUCT : "RTL9210B-CG "
SCSI_VENDOR : "Realtek "
USB_SELF_PWR : n/a
DISK_HOTPLUG : 0x00
LED : n/a
PINMUX1 : 0x00000000
PINMUX2 : 0x00000000
U2_MAXPWR : 0xfa
U3_MAXPWR : 0x70
ASPMDIS : 0x00
PCIE_REFCLK : n/a
DISK_IPS_THRES : 0x00
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00
SUSPEND_LED_OFF : 0x01
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : 0x00000000
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x05
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : 0x05
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : 0x01
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : n/a
RAID_CFG : n/a
Boot Mode : Flash
FW Ver : 1.33.44
FW Build Date : 2024.01.18
IC Pkg Type : PCIE
UUID : n/a
Disconn_ForceUSB2 : false
Last edit: 1 tuần 5 ngà y trước by yasins.
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
Thời gian tải trang: 0.081 giây