Question JMS583 chip
Email report
Good morning and congratulations on the site
I recently bought this enclosure it.aliexpress.com/item/1005001697543655....00017197644412%22%7D with JMS583 chip. I downloaded from your site first jms583_FWUpdate_Utility_0209.zip (and applied) and then jms583_20.05.00.01 (station-drivers.com).zip (and applied). I wanted to know if I did well. If I launch jms583_FWUpdate_Utility_0209 (the first FW applied) tells me:
even if the enclosure works and is connected. Thank you very much Max
Good morning and congratulations on the site
I recently bought this enclosure it.aliexpress.com/item/1005001697543655....00017197644412%22%7D with JMS583 chip. I downloaded from your site first jms583_FWUpdate_Utility_0209.zip (and applied) and then jms583_20.05.00.01 (station-drivers.com).zip (and applied). I wanted to know if I did well. If I launch jms583_FWUpdate_Utility_0209 (the first FW applied) tells me:
even if the enclosure works and is connected. Thank you very much Max
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Last Edit:1 năm 8 tháng trước
bởi admin
Last edit: 1 năm 8 tháng trước by admin.
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
Hi Max,
To update, plug it into a USB 2.0 port preferably because on USB 3.0 ports it may not be recognized
Also check the Version that corresponds to the series ex: 21.x or 2.x
To update, plug it into a USB 2.0 port preferably because on USB 3.0 ports it may not be recognized
Also check the Version that corresponds to the series ex: 21.x or 2.x
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
bởi admin
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
try the version below to know the current version of your firmware
Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.0.8 (station-drivers.com)
Here is an example of my QUMOX 256GB usb key
Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.0.8 (station-drivers.com)
Here is an example of my QUMOX 256GB usb key
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
bởi admin
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
Hi,
So, with the FW jms583_FWUpdate_Utility_0209.zip everything worked, then I was curious and I wanted to update with jms583_20.05.00.01 (station-drivers.com).zip and it also works now. My doubt is that I don't know if I was right to update from 0209 to 20.05.00.01
This is what I see: ibb.co/WD7Hf34
So, with the FW jms583_FWUpdate_Utility_0209.zip everything worked, then I was curious and I wanted to update with jms583_20.05.00.01 (station-drivers.com).zip and it also works now. My doubt is that I don't know if I was right to update from 0209 to 20.05.00.01
This is what I see: ibb.co/WD7Hf34
Last Edit:1 năm 8 tháng trước
bởi Max88
Last edit: 1 năm 8 tháng trước by Max88.
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
Now if i start jms583_FWUpdate_Utility_0209 with the enclosure connected on both USB 2 and USB 3, I get this:
ibb.co/QYN5Bjj
But everything works, the only thing is that the transfers are fluctuating, not linear as speed, but this even before and I thought to solve with these firmware
Probably that message gives it to me because I now have a more updated firmware (20.05.00.01) and therefore FW jms583_FWUpdate_Utility_0209 cannot detect it ... boh
But everything works, the only thing is that the transfers are fluctuating, not linear as speed, but this even before and I thought to solve with these firmware
Probably that message gives it to me because I now have a more updated firmware (20.05.00.01) and therefore FW jms583_FWUpdate_Utility_0209 cannot detect it ... boh
Last Edit:1 năm 8 tháng trước
bởi Max88
Last edit: 1 năm 8 tháng trước by Max88.
Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.
Thời gian tải trang: 0.723 giây