disk Is there any way to upgrading SSD firmware on Intel RST/VMD mode?

  • contra
  • contra的头åƒ� 离线 Topic Author
  • Best Poster
  • Best Poster
    Enregistré
  • 帖子: 54
  • Thanks: 60

Is there any way to upgrading SSD firmware on Intel RST/VMD mode? was created by contra

Posted 1 年 1 个月 � #665
My laptop has 3 NVME M.2 slots, filled with 2 Samsung PM9A1 and 1 Seagate FireCuda 530 SSD, and Intel RST/VMD mode is enabled by default, upgrading the Seagate FireCuda 530 SSD firmware is not available in RST/VMD mode.

I tried to disable VMD mode in the BIOS, everything works fine with both Samsung PM9A1, but the Seagate FireCuda 530 is only visible in the BIOS, it does not show up in the Windows 11 operating system after disable VMD mode, Without disassembling the Laptop, is there any way?

contra

登录注册一个帐号 以加入对话

Replied by rvail on topic Is there any way to upgrading SSD firmware on Intel RST/VMD mode?

Posted 1 年 1 个月 � #666
To avoid needing to physically remove them try disabling in bios setup the 2 Samsung PM9A1 drives, so that only the 1 Seagate FireCuda 530 SSD is recognized as being present. Disconnect any other external storage drives. Use the free software "Rufus" to create, on another machine, an external USB bootable "Windows to Go" installation. Note: the best results will be to: use a USB 3.0 or USB C connected SSD for creating the "Windows to Go" installation. There are inexpensive USB 3.0 to SATA adapter cables that can enable using a normal SATA SSD for the purpose.
Then the Seagate FireCuda 530 SSD firmware should be upgradable. 
Last Edit:1 年 1 个月 � rvail
Last edit: 1 年 1 个月 � by rvail.

登录注册一个帐号 以加入对话

创建页面时间:0.857秒
核心: Kunena 论坛