📣INFORMATION📢

Hello everyone,
Thanks to your generosity, S-D continues with the possibility of lasting until 2026. I would like to thank a very important donor.
The list of donors will be posted online by Tuesday to thank you for your generosity and thus continue to share my passion with you.
Thank you again!.😉 Fdrsoft

ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

7 ay 2 hafta önce
#3751
it must have come with a bad nvram then (cfg)

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

7 ay 2 hafta önce
#3752
Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such

Here's one as an example
Code:
;Configure Start ;=================FW Configure================= U2PHY = 02 f4 9b e0 e1 U3PHY = 02 d4 09 00 d5 00 80 VID = 0xbda PID = 0x9210 MANUFACTURE = "Samsung" SCSI_VENDOR = "Samsung" PRODUCT = "Samsung SSD PM9A1 1TB" SCSI_PRODUCT = "SSD PM9A1 1TB" SERIAL = "S641NX0TB24240" DISK_HOTPLUG = 0x0 PINMUX1 = 0x70000 PINMUX2 = 0x0 U2_MAXPWR = 0xfa U3_MAXPWR = 0x70 ASPMDIS = 0x0 ;SUSPEND_DISK_OFF = 1 ;10 minutes of idle time will disable disk power DISK_IPS_THRES = 10 ;EN_UPS = 0x0 ;PD = 0x0 LED = 0x1 ;HW_LED_CFG = 0x0 ;CUSTOMIZED_LED is 15 bytes ;CUSTOMIZED_LED = 01 01 ;SUSPEND_LED_OFF = 0x0 ;FAN = 0x0 ;DIS_SHOW_EMPTY_DISK = 0x1 ;FORCE_SATA_NORMAL_DMA = 0x0 UART_DBG_PIN = 5 ;FINGER_PRINT_EN = n ;=================Tool Configure================= ;DISCONN_FORCE_USB2 = n FORMAT_DISK = n ;INC_SERIAL = y ;PARTITION: GPT, MBR PARTITION = "MBR" ;FORMAT: NTFS, exFAT FORMAT = "NTFS" ;LABEL max allowed - characters LABEL = "My USB"
Şu kullanıcı(lar) teşekkür etti: pt83

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

7 ay 2 hafta önce
#3756
Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such
 
I want to add GUID is that possible? Orico Box a few years ago do have GUID but newer one doesn't have. Which is needed for my UnraidOS to accept the license linking.

[IMG
 

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

7 ay 2 hafta önce
#3767
Hello! Please file send to me :) E-Mail will be to sent PM

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

7 ay 6 gün önce - 7 ay 6 gün önce
#3829
Good day, Is it possible to change the IC Pkg Type section of the box and get SATA feature in the box? Is such a thing possible? There is also Realtek rtl9210b-CG SATA support, which is normally found on the box., so I set the firmware to 1.33.44.  Model : M2PV-C3
Code:
************************************************************** Device : [Port4] : Realtek RTL9210B-CG #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "Realtek" SERIAL : "012345678909" SCSI_PRODUCT : "RTL9210B-CG     " SCSI_VENDOR : "Realtek " USB_SELF_PWR : n/a DISK_HOTPLUG : 0x00 LED : n/a PINMUX1 : 0x00000000 PINMUX2 : 0x00000000 U2_MAXPWR : 0xfa U3_MAXPWR : 0x70 ASPMDIS : 0x00 PCIE_REFCLK : n/a DISK_IPS_THRES : 0x00 SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00  SUSPEND_LED_OFF : 0x01 FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : 0x00000000 DIS_SHOW_EMPTY_DISK : n/a FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x05 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : 0x05 UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : 0x01 SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a Boot Mode : Flash FW Ver : 1.33.44 FW Build Date : 2024.01.18 IC Pkg Type : PCIE UUID : n/a Disconn_ForceUSB2 : false


[img
Son düzenleme: 7 ay 6 gün önce Düzenleyen:yasins

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Sayfa oluşturma süresi: 0.083 saniye
Güç veren Kunena forum