News

Downloads: 643
Downloads: 75
Downloads: 177
Downloads: 172
Downloads: 123

Top Download

Downloads: 44544
Downloads: 17891
Downloads: 15748
Downloads: 15669
Downloads: 15164
--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 hafta 4 gün önce
#3961
pt83 yazdı:
....
I already downloaded flashing software from  github.com/bensuperpc/rtl9210-firmware
.... 

A big shout out and thanks to the guy (Bensuperpc) who made this github collection! This is sooo usefull!

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 hafta 3 gün önce
#3964
Thank you for this collection!

I have an ICY BOX IB-1817MCT-C31 and have verified that my factory config is the same as the supplied IB-1817MCT-C31.cfg.

However after successfully flashing the latest firmware the adapter does not work properly with an INTEL SS DSCKKB480GZ - it is displayed in dmesg, but any attempts in accessing it fail:
[56381.288904] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288908] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 37 e4 33 d8 00 00 28 00
[56381.288910] I/O error, dev sda, sector 937702360 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[56381.288925] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288928] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 37 e4 32 00 00 00 d0 00
[56381.288930] I/O error, dev sda, sector 937701888 op 0x0:(READ) flags 0x80700 phys_seg 26 prio class 0
[56381.288939] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288942] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 37 e4 32 d8 00 00 08 00
[56381.288943] I/O error, dev sda, sector 937702104 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[56381.288949] sd 0:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288951] sd 0:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 37 e4 32 e8 00 00 10 00
[56381.288953] I/O error, dev sda, sector 937702120 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[56381.288958] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288960] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 37 e4 33 00 00 00 20 00
[56381.288962] I/O error, dev sda, sector 937702144 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[56381.288968] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=40s
[56381.288971] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 37 e4 33 28 00 00 a8 00
[56381.288973] I/O error, dev sda, sector 937702184 op 0x0:(READ) flags 0x80700 phys_seg 21 prio class 0
[56381.288986] sd 0:0:0:0: rejecting I/O to offline device
[56381.288999] I/O error, dev sda, sector 937701888 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[56381.289008] Buffer I/O error on dev sda, logical block 117212736, async page read

Any ideas? Is this adapter just incompatible with this specific SATA device?
NVME devices work fine!
Is the newest firmware not SATA capable?

I do not have any other m.2 SATA device to check.

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 hafta 3 gün önce - 3 hafta 3 gün önce
#3965
So I bought an Ugreen device from amazon, with the dump below.

Updated it to the newest firmware from this awesome repository github.com/bensuperpc/rtl9210-firmware 1.33.44.011824, using the config file for Ugreen from there. In the config file I changed the serial number to the right serial number. Or was I supposed to use my dump as a config file?

After that it works, I can format the drive but there is no smart data displayed and the drive name is just n/a.

I guess I messed something up? Thanks for any help!

Edit: With Crystal Disk Info I can display the smart data of my WD Drive !? But I can not display the smart data with windows drive management and the WD Dashboard Software doesn't recognizw the drive. Very strange.
Code:
************************************************************** Device : [Port5] : Realtek RTL9210 #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Ugreen" PRODUCT : "Ugreen Storage Device" SERIAL : "01293805B2F4" SCSI_PRODUCT : "n/a" SCSI_VENDOR : "n/a" USB_SELF_PWR : n/a DISK_HOTPLUG : 0x01 LED : 0x01 PINMUX1 : 0x00000000 PINMUX2 : 0x00000000 U2_MAXPWR : 0xfa U3_MAXPWR : 0x70 ASPMDIS : 0x00 PCIE_REFCLK : n/a DISK_IPS_THRES : 0x0f SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : n/a SUSPEND_LED_OFF : n/a FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : 0x00000080 FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : 0x01 FORCE_SATA_NORMAL_DMA : 0x01 UART_DBG_PIN : 0x05 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a Boot Mode : Flash FW Ver : 1.29.38 FW Build Date : 2022.04.25 IC Pkg Type : PCIE UUID : n/a Disconn_ForceUSB2 : false
Son düzenleme: 3 hafta 3 gün önce Düzenleyen:Shenanigans

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 hafta 3 gün önce
#3966
Completely delete the SCSI PRODUCT: "n/a" and SCSI VENDOR: "n/a" lines in the configuration file and flash again.
Şu kullanıcı(lar) teşekkür etti: Shenanigans

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 hafta 3 gün önce
#3967
setting ; in the ini for SCSI_VENDOR or SCSI_PRODUCT just makes the drive pull the id from the drive for them
e.g. it passes through the data from the drive and is how Ugreen set the ini at the factory

Example
MANUFACTURE = "INTEL"
;SCSI_VENDOR = "INTEL"
PRODUCT = "MEMPEK1J016GA"
;SCSI_PRODUCT = "MEMPEK1J016GA"

his U2PHY and U3PHY at n/a is odd
Şu kullanıcı(lar) teşekkür etti: Shenanigans

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Sayfa oluşturma süresi: 0.081 saniye
Güç veren Kunena forum