--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

lan Marvell AQC113C FourPartID Firmware updater edit

  • Shonk
  • Shonk kullanıcısının avatarı Konu yazarı
  • Çevrim dışı
  • Super Utilisateur
  • Super Utilisateur
    Enregistré
  • İletiler: 144
  • Thanks: 56

Re: Marvell AQC113C FourPartID Firmware updater edit

4 gün 16 saat önce
#4053
@QuadDamage Well ok, something is indeed strange with 1.5.42.
After the update it survived a reboot without a problem, but not a power off & power on.
So, for now I will go back to 1.3.33 (with ASPM) and test the other 1.5.x versions later again.
This is my 1.3.33 image:  www.dropbox.com/scl/fi/okyhfc7c73m08baty...30e&st=qiogb195&dl=0

The rest of the 1MB flash is filled with 0xff.


 
do you have your factory dump so i can compare it to mine plz
Şu kullanıcı(lar) teşekkür etti: MrCrowX

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Marvell AQC113C FourPartID Firmware updater edit

4 gün 15 saat önce
#4055
Thank you very much for the manual. I managed to update my fenvi card    

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Marvell AQC113C FourPartID Firmware updater edit

4 gün 13 saat önce
#4056
do you have your factory dump so i can compare it to mine plz

my dump is identical to yours

have you already tried 1.5.42?
i just tried flashing it from you bundle and like last time, the card was gone after power off&on.

and i noticed you use the exact same mac value for all versions, while the last part usually changes with the version. though i'm not sure how important that is...
 

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

  • Shonk
  • Shonk kullanıcısının avatarı Konu yazarı
  • Çevrim dışı
  • Super Utilisateur
  • Super Utilisateur
    Enregistré
  • İletiler: 144
  • Thanks: 56

Re: Marvell AQC113C FourPartID Firmware updater edit

4 gün 12 saat önce - 4 gün 12 saat önce
#4057
i know the firmware revison is the same but i want to compare where the unique data is and what it is etc.. (on a known factory dump)

yes 1.5.42 is fine on both of mine

try going back to your factory dump (without using the patcher)

flashupdate2 --reflash ATL2-8.0.1_AGENT_sign.CLX AQC113-Fenvi_Factory_Dump_1.3.21_bdp_aqsign.clx (in my case)

power down
then flash 1.5.42 after its back up
Son düzenleme: 4 gün 12 saat önce Düzenleyen:Shonk
Şu kullanıcı(lar) teşekkür etti: QuadDamage

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Marvell AQC113C FourPartID Firmware updater edit

4 gün 12 saat önce
#4058
our dumps are absolutely identical, byte for byte. so there is no difference between two cards of the same model.

have you tried completely turning off power?
if you have wake on lan enabled, i wonder if power off is more like a reboot in your case, as the card stays active.

i already recovered my card with the CH341 (still have my quick-swap solution for the flash chip in place).

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Sayfa oluşturma süresi: 0.077 saniye
Güç veren Kunena forum