NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- pt83
-
- Offline
- Poster 2
-
Enregistré
- 文章: 7
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
6 個月 21 小時 前 - 6 個月 21 小時 前
Yes I just tried to flash one of them which send to safemode, I can just reformat to make them normal again.
The info I showed is before flashing.
The info I showed is before flashing.
Last edit: 6 個月 21 小時 前 by pt83.
Please 登錄 or 新增帳號 to join the conversation.
- Shonk
-
- Offline
- Big Poster
-
Enregistré
- 文章: 77
- Thanks: 30
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
6 個月 21 小時 前 - 6 個月 21 小時 前
I have 8 Orico RTL9201B's Orico are very lazy and hardly ever use different firmware or nvram
here's the factory config from one of mine
it should be fine on yours also
mega.nz/file/JnZgyIwK#cxP9AVtktztyI6yNun...2rTZZdX1WkiCnmiCrjzo
here's the factory config from one of mine
it should be fine on yours also
mega.nz/file/JnZgyIwK#cxP9AVtktztyI6yNun...2rTZZdX1WkiCnmiCrjzo
Last edit: 6 個月 21 小時 前 by Shonk.
The following user(s) said Thank You: pt83
Please 登錄 or 新增帳號 to join the conversation.
- pt83
-
- Offline
- Poster 2
-
Enregistré
- 文章: 7
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
6 個月 21 小時 前This is the original infoIts no good reading it now you have to read it before ever flashing it
the second one is running the goldenfirmware (safemode firmware)
as you havnt added complete info is my guess
Code:
**************************************************************
Device : [Port6] : Realtek RTL9210 NVME #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9210
MANUFACTURE : "Realtek"
PRODUCT : "RTL9210"
SERIAL : "012345678905"
SCSI_PRODUCT : "RTL9210 NVME "
SCSI_VENDOR : "Realtek "
DISK_HOTPLUG : n/a
LED : 0x01
PINMUX1 : n/a
PINMUX2 : n/a
U2_MAXPWR : n/a
U3_MAXPWR : n/a
ASPMDIS : n/a
PCIE_REFCLK : n/a
DISK_IPS_THRES : n/a
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : n/a
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : n/a
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x05
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : n/a
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : n/a
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
Boot Mode : Flash
FW Ver : 1.32.901
FW Build Date : 2022.12.07
IC Pkg Type : PCIE
UUID : n/a
Disconn_ForceUSB2 : false
Please 登錄 or 新增帳號 to join the conversation.
- Shonk
-
- Offline
- Big Poster
-
Enregistré
- 文章: 77
- Thanks: 30
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
6 個月 21 小時 前 - 6 個月 21 小時 前
no thats after you have flashed it and its running the golden firmware as you messed something up
the info has to be pulled before you ever mess with it
read up i have provided you with a orico config file
the info has to be pulled before you ever mess with it
read up i have provided you with a orico config file
Last edit: 6 個月 21 小時 前 by Shonk.
Please 登錄 or 新增帳號 to join the conversation.
- pt83
-
- Offline
- Poster 2
-
Enregistré
- 文章: 7
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
6 個月 20 小時 前 - 6 個月 20 小時 前
Your config worked. Thank you!!!. btw that is before I do flashing. Unless the manufacturer f*ckup my box, it is not me changing any info.
Last edit: 6 個月 20 小時 前 by pt83.
Please 登錄 or 新增帳號 to join the conversation.
建立頁面時間:0.082 秒