NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- wade7575
-
- �用会员
-
Enregistré
- 帖子: 45
- Thanks: 7
- blackbile
-
- Newbie
-
Enregistré
- 帖子: 4
- Thanks: 1
Replied by blackbile on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 2 个月 3 周 � #1621
I have not got this unit, I just wanted to help you with the review photo...
Though as it is NOT Realtek chip I could not know how could you do it.
There is the another review:
"Asmedia ASM2364 which is fine in terms of pure performance, but will not allow you to do SMART or low level access to the disk for FW upgrades. I did manage to update the firmware for the ASM2364 chip using a generic Asmedia flash a utility from Startech, as Yottamaster will not provide anything."
There is the another review:
"Asmedia ASM2364 which is fine in terms of pure performance, but will not allow you to do SMART or low level access to the disk for FW upgrades. I did manage to update the firmware for the ASM2364 chip using a generic Asmedia flash a utility from Startech, as Yottamaster will not provide anything."
Last Edit:2 个月 3 周 �
由 blackbile
Last edit: 2 个月 3 周 � by blackbile.
- admin
-
Topic Author
- Admin
-
Administrateur
- 帖子: 423
- Thanks: 176
Replied by admin on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 2 个月 3 周 � #1622
I have both an ASM2362 & 2364 case but each chipset works with their respective firmwares
Configuration
Gigabyte Z690 Aorus Pro, Intel Cpu I7 12700K, Memoires 32Go Kingston DDR5, nVidia Geforce RTX3060, Alimentation Asus ROG 750W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier Gamdias, HP Creative SB Kratos Free Fibre 5Gb Cable CAT8/7
由 admin
- Galixte
-
- Poster Pro
-
Enregistré
- 帖子: 25
- Thanks: 10
- wade7575
-
- �用会员
-
Enregistré
- 帖子: 45
- Thanks: 7
Replied by wade7575 on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 2 个月 3 周 � #1625
I understand the ASM chips working with their respective firmware but what I'm not sure about is do you also have to use a certain Configure file the way you do when flashing a RTL9210B controller.
由 wade7575
创建页面时间:0.650秒