--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

JMicron JMS567 Firmware Collection

Shonk
Topic Author
Offline
The Best Poster
Enregistré
Posts: 157
Thanks: 59

JMicron JMS567 Firmware Collection

11 hours 49 minutes ago - 7 hours 30 minutes ago

#4224

Make a backup of your current firmware before Flashing anything
FwUpdateTool_v1_19_13.exe
RD Version Tick
Backup Old Firmware Only Tick
Run

Multi Drive Firmware should be fine on single drive hardware it just enables the use of Port Multipliers
Single Drive Firmware can be flashed to Multi Drive Hardware but will only show one drive

If you are running a single device
I would say Run

JMS567_22.01.00.08_Passthrough_JMicron JMS567 30 Mins PM SN.bin
or
JMS567_20.06.00.01_Passthrough_JMicron JMS567 30 Mins PM SN

UASP Enabled
Drive ID Passthrough Enabled
USB Device ID Device Manufacturer: JMicron
USB Device ID Product Name: JMicron JMS567
Drive Sleep after 30 Mins
SMART Passthrough Enabled
Serial Number Passthrough Enabled

If you are running a 4 bay device
I would say Run

JMS567_20.06.00.01_Passthrough_JMicron JMS567 30 Mins PM.bin

UASP Enabled
Drive ID Passthrough Enabled
USB Device ID Device Manufacturer: JMicron
USB Device ID Product Name: JMicron JMS567
Drive Sleep after 30 Mins
SMART Passthrough Enabled
Serial Number Passthrough not enabled (works on single drive but not with more than one drive)
Firmware Seems to get confused with multiple drives with it enabled so sn is blank
TRIM not enabled on any chip before JMS578

mega.nz/file/9vQDkSAJ#sr4aQvBHVTB-MEc9B4...lUK5Ka5RcglXuWY3wcZg