NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- cesarjapa79
-
Çevrim dışı
- Newbie
-
Enregistré
- İletiler: 2
- Thanks: 0
cesarjapa79 tarafından NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx konusunda yanıtlandı
Posted 1 yıl 3 ay önce #1117
Yazan: cesarjapa79
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- ethereal
-
Çevrim dışı
- Poster
-
Enregistré
- İletiler: 10
- Thanks: 1
ethereal tarafından NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx konusunda yanıtlandı
Posted 1 yıl 3 ay önce #1118AFAIK, you cannot restore the config as it was before.I don’t dump the configuration file before
😭😭😭
Can I fixit it?
I would suggest you try some of the configs from the file I'm sharing. IIRC, it was shared in one the early pages of this thread. I've tried a brief search, but haven't been able to find it, so I'm posting it again. I would like to give credits to the original poster (don't remember his/her username).
drive.google.com/file/d/1Glc693LDwUYi_4A...0IS/view?usp=sharing
Last Edit:1 yıl 3 ay önce
Yazan: ethereal
Son düzenleme: 1 yıl 3 ay önce Düzenleyen:ethereal Neden: Mistype
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- sdefrwggerg
-
Çevrim dışı
- Best Poster
-
Enregistré
- İletiler: 30
- Thanks: 19
sdefrwggerg tarafından NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx konusunda yanıtlandı
Posted 1 yıl 3 ay önce #1122
you can try
SUSPEND_LED_OFF = 0x1
or
SUSPEND_LED_OFF = 0x3
or
HW_LED_CFG = 0x1
www.station-drivers.com/index.php/en-us/...on-1-xx?start=65#721
SUSPEND_LED_OFF = 0x1
or
SUSPEND_LED_OFF = 0x3
or
HW_LED_CFG = 0x1
www.station-drivers.com/index.php/en-us/...on-1-xx?start=65#721
Yazan: sdefrwggerg
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- oliver972
-
Çevrim dışı
- Newbie
-
Enregistré
- İletiler: 1
- Thanks: 0
oliver972 tarafından NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx konusunda yanıtlandı
Posted 1 yıl 3 ay önce #1131
Admin,
I have 5 of these Fideco M209CPS adapters and was wondering which Firmware version would be the best for updating them?
I attached Pics of the adapter and a Config file from one of them. They are beautiful devices with built in fans.
Thank you, Larry
I have 5 of these Fideco M209CPS adapters and was wondering which Firmware version would be the best for updating them?
I attached Pics of the adapter and a Config file from one of them. They are beautiful devices with built in fans.
Thank you, Larry
Yazan: oliver972
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- admin
-
Çevrim dışı Konu yazarı
- Admin
-
Administrateur
- İletiler: 644
- Thanks: 328
admin tarafından NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx konusunda yanıtlandı
Posted 1 yıl 3 ay önce #1132
Hi, the best would be to already save everyone's configuration then put the latest firmware by modifying the configuration file before the update to adapt it to the new firmware
If needed, there's sdefrwggerg who knows more than me
If needed, there's sdefrwggerg who knows more than me
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Yazan: admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
Sayfa oluşturma süresi: 0.157 saniye