--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- TiX
- Çevrim dışı
- Poster
-
Enregistré
- İletiler: 5
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 6 ay önceLütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- Alien Invader
- Çevrim dışı
- Poster
-
Enregistré
- İletiler: 7
- Thanks: 3
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 6 ay önce - 1 yıl 6 ay önce
3.2 Gen1 is 5Gbit, some mainboard makers go cheap and wire Type-C ports to 5Gbit for cost cutting. A nice example are those
cheap
A620
Chipsets which have the option for 10Gbit both from CPU and Chipset.
I recently got a M2 SATA cheap 512GB SSD to test my Unionsine MD202 case cause I had only trouble getting my SM2263XT drive to work with it. For some reason that Intenso NVME SSD ain't playing well with anything. The MD202 works just fine with the other NVME I have around (RTS5765).
I recently got a M2 SATA cheap 512GB SSD to test my Unionsine MD202 case cause I had only trouble getting my SM2263XT drive to work with it. For some reason that Intenso NVME SSD ain't playing well with anything. The MD202 works just fine with the other NVME I have around (RTS5765).
Son düzenleme: 1 yıl 6 ay önce Düzenleyen:Alien Invader
Şu kullanıcı(lar) teşekkür etti: admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- admin
- Konu yazarı
- Uzakta
- Admin
-
Administrateur
- İletiler: 779
- Thanks: 382
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 6 ay önce - 1 yıl 6 ay önce
to be sure to be in USB 3.2, check with the Chipgenius utility below
the 500 Mbps instead of 1000Mbps and a speed problem due to the port or the cable as said by Alien Invader
The firmware can also but already check the port then the cable (USB-C port)
or via the update utility (Super plus)
the 500 Mbps instead of 1000Mbps and a speed problem due to the port or the cable as said by Alien Invader
The firmware can also but already check the port then the cable (USB-C port)
Bu ek dosyasını konuklar görüntüleyemez.
Görüntülemek için hesabınız varsa oturum açın ya da kayıt olun.
Görüntülemek için hesabınız varsa oturum açın ya da kayıt olun.
or via the update utility (Super plus)
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Son düzenleme: 1 yıl 6 ay önce Düzenleyen:admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- TiX
- Çevrim dışı
- Poster
-
Enregistré
- İletiler: 5
- Thanks: 0
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- sdefrwggerg
- Çevrim dışı
- Best Poster
-
Enregistré
- İletiler: 32
- Thanks: 21
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 yıl 6 ay önce
try to set Windows Power saving settings to High
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
Sayfa oluşturma süresi: 0.088 saniye