JMS583 chip
- admin
-
Topic Author
- Admin
-
Administrateur
- Posts: 423
- Thanks: 176
Email report
Good morning and congratulations on the site
I recently bought this enclosure it.aliexpress.com/item/1005001697543655....00017197644412%22%7D with JMS583 chip. I downloaded from your site first jms583_FWUpdate_Utility_0209.zip (and applied) and then jms583_20.05.00.01 (station-drivers.com).zip (and applied). I wanted to know if I did well. If I launch jms583_FWUpdate_Utility_0209 (the first FW applied) tells me:
even if the enclosure works and is connected. Thank you very much Max
Good morning and congratulations on the site

I recently bought this enclosure it.aliexpress.com/item/1005001697543655....00017197644412%22%7D with JMS583 chip. I downloaded from your site first jms583_FWUpdate_Utility_0209.zip (and applied) and then jms583_20.05.00.01 (station-drivers.com).zip (and applied). I wanted to know if I did well. If I launch jms583_FWUpdate_Utility_0209 (the first FW applied) tells me:
even if the enclosure works and is connected. Thank you very much Max
Configuration
Gigabyte Z690 Aorus Pro, Intel Cpu I7 12700K, Memoires 32Go Kingston DDR5, nVidia Geforce RTX3060, Alimentation Asus ROG 750W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier Gamdias, HP Creative SB Kratos Free Fibre 5Gb Cable CAT8/7
Last Edit:1 year 1 month ago
by admin
Last edit: 1 year 1 month ago by admin.
Please Log in or Create an account to join the conversation.
- admin
-
Topic Author
- Admin
-
Administrateur
- Posts: 423
- Thanks: 176
Hi Max,
To update, plug it into a USB 2.0 port preferably because on USB 3.0 ports it may not be recognized
Also check the Version that corresponds to the series ex: 21.x or 2.x
To update, plug it into a USB 2.0 port preferably because on USB 3.0 ports it may not be recognized
Also check the Version that corresponds to the series ex: 21.x or 2.x
Configuration
Gigabyte Z690 Aorus Pro, Intel Cpu I7 12700K, Memoires 32Go Kingston DDR5, nVidia Geforce RTX3060, Alimentation Asus ROG 750W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier Gamdias, HP Creative SB Kratos Free Fibre 5Gb Cable CAT8/7
by admin
Please Log in or Create an account to join the conversation.
- admin
-
Topic Author
- Admin
-
Administrateur
- Posts: 423
- Thanks: 176
try the version below to know the current version of your firmware
Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.0.8 (station-drivers.com)
Here is an example of my QUMOX 256GB usb key
Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.0.8 (station-drivers.com)
Here is an example of my QUMOX 256GB usb key
Configuration
Gigabyte Z690 Aorus Pro, Intel Cpu I7 12700K, Memoires 32Go Kingston DDR5, nVidia Geforce RTX3060, Alimentation Asus ROG 750W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier Gamdias, HP Creative SB Kratos Free Fibre 5Gb Cable CAT8/7
by admin
Please Log in or Create an account to join the conversation.
- Max88
-
- Poster Pro
-
Enregistré
- Posts: 25
- Thanks: 0
Hi,
So, with the FW jms583_FWUpdate_Utility_0209.zip everything worked, then I was curious and I wanted to update with jms583_20.05.00.01 (station-drivers.com).zip and it also works now. My doubt is that I don't know if I was right to update from 0209 to 20.05.00.01
This is what I see: ibb.co/WD7Hf34
So, with the FW jms583_FWUpdate_Utility_0209.zip everything worked, then I was curious and I wanted to update with jms583_20.05.00.01 (station-drivers.com).zip and it also works now. My doubt is that I don't know if I was right to update from 0209 to 20.05.00.01
This is what I see: ibb.co/WD7Hf34
Last Edit:1 year 1 month ago
by Max88
Last edit: 1 year 1 month ago by Max88.
Please Log in or Create an account to join the conversation.
- Max88
-
- Poster Pro
-
Enregistré
- Posts: 25
- Thanks: 0
Now if i start jms583_FWUpdate_Utility_0209 with the enclosure connected on both USB 2 and USB 3, I get this:
ibb.co/QYN5Bjj
But everything works, the only thing is that the transfers are fluctuating, not linear as speed, but this even before and I thought to solve with these firmware
Probably that message gives it to me because I now have a more updated firmware (20.05.00.01) and therefore FW jms583_FWUpdate_Utility_0209 cannot detect it ... boh
But everything works, the only thing is that the transfers are fluctuating, not linear as speed, but this even before and I thought to solve with these firmware
Probably that message gives it to me because I now have a more updated firmware (20.05.00.01) and therefore FW jms583_FWUpdate_Utility_0209 cannot detect it ... boh
Last Edit:1 year 1 month ago
by Max88
Last edit: 1 year 1 month ago by Max88.
Please Log in or Create an account to join the conversation.
Time to create page: 0.592 seconds