Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45

use iperf z390 can only get 6.7gbps of actual throughput on pcie 3.0 x1 after overheads maybe you will get more on a pch that has more bandwidth
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput

Je ne comprends pas ce qu'il faut modifier. Mon périphérique correspond bien à cette configuration #   3. VID=0x1D6A, DID=0x04C0, SVID=0x1D6A, SDID=0x0001
Mais il me dit device not match. Une idée ?